Thank you Pavel, so such support depends on OS? (sorry for the dumb question) I know Armbian but I want to use Android FileZilla https://downloader.vip/malwarebytes/ https://downloader.vip/rufus/](since I want to use the 13.2MP MIPI Camera Module which seems to work only on Android), what about sup...

At this regard I apologize if I haven't fully understood the thing, but somewhere I read that this shouldn't be done since it can cause serious damages to the board. Is it true? Yes and maybe it is true. I'm also no expert. But you could short your board if you do this wrong. it can't hurt the boar...

Try here: http://linux-sunxi.org/Main_Page https://forum.armbian.com/forum/4-development/ The above is mostly Linux, it does not give the details for baremetal programming. I’ve found the following: https://github.com/dwelch67/allwinner_samples/tree/master/H3 https://github.com/trebisky/orangepi {A...

@guidol - Thanks for the response. I am planning on doing a custom PCB, I am mainly concerned with the schematic to get the Duo to communicate over MiniPCIe and not the physical size (unless there is a non-physical fit issue I am missing). Thanks again, Andy I am trying to build a wifi mesh network...

Trying to figure out how to convert NV12 to be useful in OpenCV. Seems (python) frame = cv2.cvtColor(frame, cv2.COLOR_YUV2BGR_NV12) alone is not enough. There are many color types. Any hint how to convert NV12 to BGR ? It is not a good idea - instead of use Rockchip ISP hard FileZilla Malwarebytes ...

Hi, Sorry for the question above. It was simple bad contact on FPC cable connector. Now I can see Lubuntu GUI on S430 and pi@FriendlyELEC:~$ dmesg | grep 'Kernel command line' [ 0.000000] Kernel command line: console=ttySAC0,115200n8 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait init=/sbin/init logl...

Topper wrote:
Did someone manage to install CAM500B at Fire3 ?

I don't found CAM500B driver in 4.4.49-s5p6818.FileZilla Malwarebytes Rufus

Here are sources definitions for Armbian: https://github.com/armbian/build/blob/master/config/sources/rk3399.conf#L34-L35 Bugs in Armbian are present in official builds as well. Showbox iTunes Notepad++ I don't want to waste your time. I’m trying to make my own kernel for NanoPC-T3 using the source...

Yep, the Artik 710 resources can be helpful and informative given that the Artik 710 also uses the s5p6818. I've also spent some time looking for the sources for fip-loader.img and fip-secure.img. No luck yet. It does look like there is an Artik repository on FileZilla Malwarebytes Rufus Github wit...

what is not working with Bluetooth? the stack cannot be installed? The Fire3 doesn't even have it however it seems that it shouldn't be that difficult to bake the stack in? There is no forum from Armbian that I can ask question on Fire3. So I ask my questions here. Sarkari Result iTunes Notepad++ H...

Happy to see you finally reached the prompt, Alexiss :D However, that's just a "dd" issue, caching changes before a commit. It doesn't explain the lack of HDMI activity. :? I wish FriendlyARM took the Raspi road and created a FAT32 mini-partition, with some human-readable kernel config fi...

Thanks Jerryn I updated the kernel recently and it included a new fake battery driver for the NanoPC so I am thinking I could use this as a base to control the system. Using a battery monitor IC with I2C I could read the real value and feed that back into the Android OS. I am still trying to upload...

I'm also looking to install/use zfs and have been wrestling with the same problem. Tried both the FriendlyDesktop and lubuntu images and both seem to be stuck on 4.4.143 kernel and although I can use the ubuntu kernel upgrade utility to find and "install" different kernels none of them ac...

Not required. I rebuild the kernel and Android OS from source so now it boots in landscape mode. I also added GSM modem support so now also have data coverage outside WiFi areas. Our LCD device is 480x854. I've swapped xresol/yresol in kernel frame buffer source code,(not changing cpu MLC resolutio...

I flashed the last recent Armbian Bionic (desktop mainline kernel 4.14.y) dated on 22.08.2018. I2C is available: # fdtget /boot/dtb/nexell/s5p6818-nanopi-fire3.dtb i2c0 status okay # ls -la /dev/i2c* crw------- 1 root root 89, 0 Sep 2 09:15 /dev/i2c-0 crw------- 1 root root 89, 1 Sep 2 09:15 /dev/i...

2. Without display at all (HDMI mode) scratch is broken, clear watchdog timer start working to aarch32 waiting for pll change.. -------------------------------------------------------------------------------- Second Boot by Nexell Co. : Ver0.3.6 - Built on Jun 29 2016 15:19:53 ---------------------...

I compared the DTB from the running Armbian Bionic (kernel 4.14) system (dtc -I fs /sys/firmware/devicetree/base) with the DTS from FriendlyArm (kernel 4.4) ( https://github.com/friendlyarm/linux/blob/nanopi2-v4.4.y/arch/arm64/boot/dts/nexell/s5p6818-nanopi3-common.dtsi ) They are very different. E...

Just a bump since this forum/topic is unfortunately very quiet. I did even sent an email asking about MIPi-CSi camera that can be used for NanoPC boards and no reply. It is quite unsettling. I did some research on my own in the meantime, with meagre result so far. Sarkari Result TurboTax Gogoanime ...

I'm also looking to install/use zfs and have been wrestling with the same problem. Tried both the FriendlyDesktop and lubuntu images and both seem to be stuck on 4.4.143 kernel and although I can use the ubuntu kernel upgrade utility to find and "install" different kernels none of them ac...

I'm also looking to install/use zfs and have been wrestling with the same problem. Tried both the FriendlyDesktop and lubuntu images and both seem to be stuck on 4.4.143 kernel and although I can use the ubuntu kernel upgrade utility to find and "install" different kernels none of them ac...

I'm in the same situation as pavelectric: Running Friendly Desktop 18.04, using the gst-camera.sh script to test the CAM 1320 module. Worked for a short time, but since then it is unresponsive and I constantly get timeout errors CAMHALError: getMeasurement: poll error, Success CAMHALError: threadLo...

I'm also looking to install/use zfs and have been wrestling with the same problem. Tried both the FriendlyDesktop and lubuntu images and both seem to be stuck on 4.4.143 kernel and although I can use the ubuntu kernel upgrade utility to find and "install" different kernels none of them ac...