Power & Source of Big Ideas

Stupid question, but how do I safely remove the board from the case? answering my own stupid question, you have to take out the microSD card, and then board basically falls out. I put many holes into my yellow case. It looks like swiss cheese, but it needs more holes. FriendlyElect should NOT sell ...
Sure, nanopi-r2s is available for download at https://downloads.openwrt.org/snapshots/targets/rockchip/armv8/ awesome! Thanks. I downloaded an image but the sha256sum doesn't match. From the link: openwrt-rockchip-armv8-friendlyarm_nanopi-r2s-ext4-sysupgrade.img.gz 6aa49c499f434e4697c2be4b438c09a23...
jayanta525 wrote:
Sure, nanopi-r2s is available for download at https://downloads.openwrt.org/snapshots ... hip/armv8/


awesome! Thanks.
Problem solved. LOL https://i.imgur.com/Y6EjxcL.jpg Was 72C absolute minimum without fan. https://i.imgur.com/IUcY1mF.png Great mod! I need to do some drilling like this to cool this sucker down. I regret not buying the metal case :( Running Armbian mine idles at 65-68 degrees with no load. Stupid ...
Cool. I see in the screenshots of OpenWRT Statistics the ambient temperature is only ~30 degrees?!? I think my R2S runs about 60-70 degrees all the time, doing nothing. Mind you this was on Armbian. I wonder if I have a heatsink problem. I need to flash FriendlyWRT again and see what the temperature...
That would be cool to have Debian support for more boards, then we could run Yunohost.

Been running Yunohost on a spare computer for over a year. I highly recommend it!
I am using my Nano Pi R1 as a home router. I am using FriendlyWRT 19.07 image. 1. What speeds are you guys getting from the onboard Wifi? Any performance tweaks I should know about? I'm very new to OpenWRT. $ iperf3 -c 192.168.2.1 Connecting to host 192.168.2.1, port 5201 [ 5] local 192.168.2.152 po...
If the serial window is blank you could try to press enter to get a login prompt if the device has booted up. If nothing appears after pressing enter/return then you could could try to switch rx with tx - some adaptors use rx-tx/tx-rx and some rx-rx/tx-tx thanks for the suggestion, but sadly it did...
After not touching this for many months, I did more digging on Google and found the solution to my problem. From this walkthrough (below) on Github I found the magic information I required: Use the board headers, not the UART. https://gist.github.com/pjobson/95b67bc4f17c2f60278ec40bf15ca99d I was tr...
If the serial window is blank you could try to press enter to get a login prompt if the device has booted up. If nothing appears after pressing enter/return then you could could try to switch rx with tx - some adaptors use rx-tx/tx-rx and some rx-rx/tx-tx thanks for the suggestion, but sadly it did...
2.) maybe you dont need to reflash - you could login via TTL-serial and correct your network settings without using a network/SSH ;) that would be great. i am having trouble getting TTL-serial connection to work. maybe you have some pointers? this is what i tried so far 1) plugged in USB to TTY cab...
so i guess i need a USB to TTL serial cable? USB to TTL Serial Cable - Debug / Console Cable for Pi https://www.friendlyarm.com/index.php?route=product/product&path=84&product_id=178 it says "Connect Matrix-USB2UART to NanoPi NEO/NEO Air/NEO2/NEO Plus2's serial Interface" 1. does t...
Hello, I was playing around with network settings trying to make armbian a router, but now I can't login via SSH. armbian is installed to eMMC $ sudo arp-scan 192.168.0.1-192.168.3.1 [sudo] password for admin: WARNING: Could not obtain IP address for interface enp3s0. Using 0.0.0.0 for the source ad...
igorp wrote:
arkadi wrote:
shouldn't be this hard to flash eMMC eh?

With Armbian? Trivial.


awesome! thank you. i'm running armbian now. super easy and documentation is so clear.

friendly elec's english documentation is anything but friendly :/
igorp wrote:
arkadi wrote:
Hello! Linux veteran, but new to this SBC stuff.

arkadi wrote:
I tried:


Also try OS made by Linux veterans: https://www.armbian.com/nanopi-r1/


thank you! looks cool.

downloading to give it a go. shouldn't be this hard to flash eMMC eh?
I tried: -to login to ssh many ways: ssh root@[IP address] / ssh root@ [ip address] -p 8200 -tried plugging it into WAN ethernet port, it can't get IP -tried connecting to FriendlyElec wifi network that appeared. I was using the wrong ip address. The Nano was giving my computer address: 192.168.2.1...
Hello! Linux veteran, but new to this SBC stuff. I'm having trouble setting up my NanoPi R1. I followed instructions from http://wiki.friendlyarm.com/wiki/index.php/NanoPi_R1 Stuck at this step: 4.3.1.1 Flash to eMMC If your board doesn't support HDMI or no monitor is connected you can select an OS ...