FriendlyELEC-Forum

Thank you Maroon5. I've seen my video is on the FriendlyARM site. Nice to see my work is appreciated. The T3+ now does good work as my laptop SBC. Haven't had any problems(I could not solve). I'm saving some money now to buy the NanoPC-T4 next month. I'll make a video of it too then. I was planning...

mpanetta wrote:
Mindee wrote:
So can you modify your review on NanoPC-T4? Thank You

I wrote a new one. It would not let me update the old one. I also purchased another board

Thanks,
Mike

Thank You, Have a nice day.

So can you modify your review on NanoPC-T4? Thank You

We have MIPI-CSI camera module(CAM1320), it seems using the I2C2, the module can work well too.

We have no that to test.

The HDMI, LCD module, PMU etc all use I2C, and all can work fine. So the I2C is no problem. We’ll add a demo using I2C to connect with a OLED module in the future.

But the Ubuntu Core has no Chrome & MPV player. We'll use Qt-5.9 based on framebuffer, which has OpenGL/GPU accelerating , And gst for media player, which has VPU accelerating.

We have no sbs-battery, and can't test it. You can have a try to config & compile the kernel since it's open source.

P.S Can I know what kind of SBS battery do you use?

Thank you

Thanks for your sharing. We’ll release Ubuntu Core -18.04 (Bionic) very soon, Maybe within this week. It would be great if you test again then.

Yes, Same acrylic case for now, just protecting the board. We are working on a metal case for T4.

Thanks for your patients.

We are working on the better ROM, and has released 4 version after released,

Thanks for your patients.

We’ll add some demo to show hot to use I2C under linux in the future update, please wait.

Thank You.

We have started to sell 13MP MIPI camera module already - CAM1320， it can be used under Android.

Hi, all

We checked the issues, and will update the NAS ROM this week, please wait.

Thank you

Mindee

andyduke wrote:
Mindee, with which HDD and SSD models did you test version 1.2?

Hi

For HDD model, Please check the comparison chart on this page:
http://www.friendlyarm.com/index.php?ro ... uct_id=192

Thank you

Mindee

Hi guys, I'm posting this because there are no linux images available for the Nanopi-k2 out from Friendlyarm yet, I've spent the last few days playing with the board and getting help from the great guys over at Armbian and managed to get a workaround to loading Armbian on the board for now. The boa...

Hi, All We have new version NAS Dock V1.2 days ago, for NAS Dock V1.0, Perhaps there is a small bug, two capacitances on the board is wrong, you can modify it if you can(I will post the picture later). We can re-send the new version NAS Dock to you at free. Please email to sales@friendlyarm.com Than...

jackietang wrote:
May I know around when M2A is available?

Next week.

Thank you

It appears that the 5102 HAT uses pin 6 GPIOL11 (363) of the nanopi for Infra Red purposes, like the allwinner H3 datasheet suggests. However, I cannot get this to work with the matrix demo example. I changed the pin number in this example to the right value (from 203 to 363) but still no luck. The...

I selected this specifically for the Ubuntu Mate OS. However I cannot find a link to the MATE for the M1 Plus, only for the M1. I of course attempted to use this but the drivers are different and have no WiFi/BT/LAN connectivity and am not experienced enough to get around the issue. I would like to...

Hi, All

Can you post the serial log? Or Can you try a SSD Disk?

Thank you

Mindee

Hi All, We have released a new ROM based on Ubuntu Core 16.04, it has more useful feature: - add a config tool : npi-config -- you can config the audio output, ssh, locale setting, etc. like raspi-config - add a welcome display - add the Networking-manager new ROM link NanoPi-neo-ubuntu-core-QtE-sd4...

Any help ? May be to make my question simpler. I thought that the Hat PCM5102A had an I2S output different than the native I2S output of NanoPI Neo. Is the I2S output on the Hat 5102A a bit reclocked or something similar (PLL treatment) or I was wrong and the I2S output on the Hat 5102A is exactly ...

msamiullah wrote:
Hi all,
I know Nanopi Neo has one populated usb 2 port and two more through expension port. Wanted to know if the two usb ports on the expension port are actually high speed usb 2.0 ? or those are slow speed ports.

thanks,
Sami

Yes, both 3 USB have same speed.

-- Mindee

Gents, I was looking at the NanoPi M3 as an interesting module for a cluster for computation of large networks daily because of: - cost - 8 cores - Gigabyte network So I got hold on 6 of them and I started to test them for performance. Here are the parameters for testing: - the M3 uses the dedicate...

Hi Mindee, thank you for your answer. I am currently no monitor with hdmi input. I have started the board now with Armbian and at the same time appears Armbian kernelboot information on the monitor. Shortly thereafter the monitor again no signal. Presumably when the desktopscreen is output. Do you ...

g0kinu0jwghd wrote:
Can I see the BoardLED even if the case is attached?

You mean which board?

Thank you

-- Mindee

Thanks Mindee for the video Do you think NanoPI M3 will also give me same resolution of the video with CAM500B ? NanoPi M3 and NanoPC T3 both have same processor, hence I would expect the same video resolution and performance. Can you please confirm? So that I can order NanoPi M3. Thanks again for ...

The instructions on the FriendlyARM wiki direct you to use the Linux 3.4 git branch: git clone https://github.com/friendlyarm/linux-3.4.y.git cd linux-3.4.y git checkout nanopi2-lollipop-mr1 I see that the FriendlyARM git account also has a Linux 4.1 repo. Can this kernel be used with the M3? Does ...

Guys tell me. Can I configure NEO AIR in access point mode? If possible, tell me how. ;) We'll release a new ROM that support switching AP mode soon, please wait. Thank you -- Mindee This is very good news. And when is it planned to release a new image with an access point? And where it will be pos...

renato wrote:
Hello,
I have the same problem as Bob, but I've used the Debian OS of frendly arm.

The monitor is connected with HDMI-DVI cable.

Have you a idea?

Renato

Hi, Renato

Some HDMI-DVI converter is not compatible, it's better to connect a display device directly.

Thank you

-- Mindee

Thanks Mindee for the video Do you think NanoPI M3 will also give me same resolution of the video with CAM500B ? NanoPi M3 and NanoPC T3 both have same processor, hence I would expect the same video resolution and performance. Can you please confirm? So that I can order NanoPi M3. Thanks again for ...

Brian Beuken wrote:
I like this new A64 board, but I would like to buy it with a case, has one been designed yet or will it fit in an existing design?

Here's the 3D printing model link:
http://www.thingiverse.com/thing:1998961

-- Mindee

Brian Beuken wrote:
I like this new A64 board, but I would like to buy it with a case, has one been designed yet or will it fit in an existing design?

Not case for NanoPi A64 yet, We'll design one 3D printing model soon, it's better to print one yourself.

Thank you

-- Mindee

Capiton wrote:
Guys tell me. Can I configure NEO AIR in access point mode? If possible, tell me how.

We'll release a new ROM that support switching AP mode soon, please wait.

Thank you

-- Mindee

Just found out why. It was the cable! The Female 3.5mm to 2 Male RCA that came with this NanoHat PCM5102A. I moved the Female 3.5mm plug around and got it to sound right but just touching it can make it sound bad again. Wow neat found out what was wrong. It sounds good now. -Raymond Day That's good...

I did what you said and it still sound like junk! I downloaded a free FLAC song it seem to play good but never hard it before. So I got the 1st CD I could find were I would know what the song sounds like. Disney Tangled When will my life begin. Used Windows Exact Audio Copy to made the one song fro...

Thanks Mindee! are there any videos for NanoPi M3 or NanoPC T3 showing that it works good with CAM500A - 5MP 1080p Camera Module - showing video on HDMI monitor? Just to make sure that if I buy this NanoPi M3 or NanoPC T3 - I would not have any difficulty in my project. Thanks Silas Hi, I have a vi...

Hi, I have a prototype circuit I want to turn into a "hat" for my NanoPi NEO Air, and I'm keen to know if there's any KiCad or Eagle templates available so it's not so fiddly when it comes to the PCB layout alignment etc? Regards, Matt Not yet for such format file, I will have a ask. Plea...

I did not have the pin's to plug it in to my NanoPi NEO. But I order some from Jameco. Solder them in and play music and it sounds like speakers are in a can! Or some back grounds sounds are very low. Hardly can hear them. I think something is wrong with this NanoHat PCM5102A board. Is there a way ...

Thanks Mindee! are there any videos for NanoPi M3 or NanoPC T3 showing that it works good with CAM500A - 5MP 1080p Camera Module - showing video on HDMI monitor? Just to make sure that if I buy this NanoPi M3 or NanoPC T3 - I would not have any difficulty in my project. Thanks Silas I have no such ...

I live in USA Michigan. All the other orders I did came with the pin headers and I had to solder them in the NanoPi NEO and even the NanoPi Air. -Raymond Day My email address is : mindee.friendlyarm@gmail.com, and can try to arrange sending several pin header to you in USA via USPS from Seattle. Pl...

lpercifield wrote:
I'm looking to use 460800. 115200 works without issue.

We have no way for high speed baud rate for now, We can have a try in the future.

Thank you

-- Mindee

Before when I got a NanoPi NEO it just auto came with all the pin headers and I could solder them in. But this time I really needed them because I got the NanoHat and can't plug it in with out them. But my order did not have them and looks like there is no way to even tell them to add that on to yo...

Hi I had bought NanoPi M1 - the board works fine - only that it is 32 bit - and there seems to be some difficulty setting up development environment for 32 bit - my host PC is 64 bit. So now I am looking for 64 bit hardware with Camera inputs and HDMI + Ethernet + USB etc. Can anyone suggest ? Than...

H3 burned out! Hello I'm having a problem on a nanoPi -M1 card This board is with H3 damaged, would you like to know the following? If I replace the H3 alwinner with a new H3 BGA, purchased directly from an Alwinner vendor, would it be necessary to have some firmware for this new processor to work ...

Hi I am considering to use NanoPI Neo Air for my next embeded project. I need some help for my development set up: 1. Plan to use Eclipse for C/C++ 2. Develop the code on Linux / Ubuntu in Eclipse IDE 3. And then cross compile for H3 and deploy only the executables onto NanoPi Neo Air My questions:...

Hi, all

Thanks for the video maker.

Here is the video link : A very detailed video on how to flash OS into eMMC with the NanoPi NEO Air board for dummies

Enjoy it and good luck!

-- Mindee

And we'll have a look on 4.9.0 :-)

-- Mindee

Hi, According to our experience for tens years, I don't agree the new kernel version is better for the end-user. As a maker or an amateur, you can try any new things. But the new kernel is not panacea. 1. if not us friendlyarm team, nobody try to reduce the H3's consumption for a very small size boa...

Hello, I'm having an issue with the NanoPi Neo Air UART baud rates. It seems that the default clock divider only supports a few baud rates: https://github.com/friendlyarm/h3_lichee/blob/master/linux-3.4/drivers/tty/serial/sunxi-uart.c#L357 Any suggestions to be able to modify the APB2 clock setting...

Search found 107 matches