FriendlyELEC-Forum

All is good now. I installed Armbian and now I see the full 1024 MB of ram. My OLED screen doesn't work anymore so I am figuring that out, any suggestions? Sorry I cant help here... I also got a normal Neo (not Neo2) with OLED-Hat, but the display will only run with a (in my opinion) kernel-module/...

christine wrote:
I'll see if I can get it to work with dhcp now.

for DHCP you have to edit your IPV4-WiFi Connection from "Manual" to "Automatic"

Glad to here that it works

I did found a strange Message in dmesg of my NanoPi Neo with OLED Hat using the image nanopi-neo_ubuntu-oled_4.14.0_20171219.img : [ 0.324534] Unpacking initramfs... [ 0.680355] Initramfs unpacking failed: junk in compressed archive I also reinstalled the image, but did get the same message (did hav...

I already briefly checked and it seems that there are no special settings and 1Gb version must just work. At least kernel wise. My NanoPi Neo Core2 - with 1GB Ram - is also using the normal NanoPi Neo2 armbian image and is showing the full 1GB of Ram without any special settings: Welcome to ARMBIAN...

Yes I made sure to order the 1GB one. NEO2 Complete Starter Kit - DDR3 RAM: 1 GB RAM is in my email and here is the link http://www.friendlyarm.com/index.php?route=product/product&path=85&product_id=189 Has an $8 1 GB upgrade option. Ohh - I didnt know about this 1GB option for the Neo2 (Ki...

I have a nanopi neo plus 2. I follow instructions on this page http://wiki.friendlyarm.com/wiki/index.php/NanoPi_NEO_Plus2 to have it connect to my wifi network using "sudo nmcli dev wifi connect "SSID" password "PASSWORD"" with the right ssid and pw. It doesn't work, ...

I just used the image that came preinstalled on the sdcard as I ordered a Neo2 with the OLED and case as I am new to nano sized computers but not new to Linux. ! When you ordered a NanoPi Neo2 with OLED-Hat and (the black) case like: http://www.friendlyarm.com/index.php?route=product/product&pr...

maurddz wrote:
I am only seeing 512MB Ram and I have a 1 GB board, anything I can do so it sees the rest of the ram? Tried to figure it out but no clue.

If you could tell us which board do you have with 1GB then we could give you the right link to a image.
And which image did you use to boot?

What could be the reason? I connect NanoPi A64 and it does not turn on. Only the green LED is on. On the CD installed ubuntu mate. When you turn on the processor does not heat up at all. Is it possible to know what's the reason through Uart? You could try a different OS-Image on you uSD-Card if the...

shuita wrote:
Hello Guidol,
Happy new year!
But, yes you're right, the sound is really low
Thanks you so much.

Happy new year also to you

You will need a active speaker then the volume will be OK!
You are welcome

USB port pins (1-5 on the single-row pins?) This will work if those pins aren’t being useful by the NanoHat OLED, which will be connected to the board by the two sets of pins (single-row and double-row). Does the NanoHat OLED use the USB pins? Thank you for taking the time to read this message. You...

Today I received my NanoPi Neo Core2 Kit. While building all pieces together I wondered about that the case couldnt be closed when the heatsink is installed on top of the cpu board... OK - if the heatsink is installed the case would suspend the airflow and the pictures at the webpage do only show th...

I would do that but the problem is that the board will only boot from the USB port and it won't boot from the sd card slot. Hmm... I think you should try to connect a USB-TTL-serial adapter to the neo plus2 and to interrupt the uboot countdown (mostly very short). Mostly there is an option to boot ...

Or preferably: 2.somehow change the info on emmc to boot to emmc Thank you in advance :D For the 2nd you should try the "Flash Image to eMMC" on the Wiki-Page http://wiki.friendlyarm.com/wiki/index.php/NanoPi_NEO_Plus2 eflasher-image: https://drive.google.com/open?id=1SEeCUygXCEIP38i28P97...

Dear All , There is a noise on line outs from power up continuously and hazardous sound. when amplify the lines , it becomes much greater. I guess that lines tracks are not kept away from digital tracks in PCB design. I got some success swapping the power-supply for a better one (from smartphone-po...

I plugged a passive speaker on LR & GND pins (PCB v1.1) Do you have an idea ? a PASSIVE Speaker could be much to quiet.... you need an speaker with amplifier. And with Amplifier and the right asound.conf you also have to raise the volume inside the alsamixer... Which Audio-Out device is shown i...

The new NEO2 I just received has a non locking uSD card socket. Do you got an old Neo2 with locking uSD-socket? I have got 2 Neo2 which I did buy at differnet times and all 2 got an non-locking uSD-socket. I dont like they because I had to use a tool to remove the card. On a locking socket it ony a...

I installed the 4.14.0 and updated with the modified sources.list successfully:
Fetched 75.2 MB in 9min 33s (131 kB/s)
Linux NanoPi-NEO2 4.14.0 #82 SMP Fri Dec 8 14:33:14 CST 2017 aarch64 aarch64 aarch64 GNU/Linux

@guidol, are you sure your using ...4.14.0_20171208.img ? I just downloaded it and can't see how yours could be different. Mine is a "little" bit older :) nanopi-neo2_ubuntu-oled_4.11.2_20170909.img.zip Linux NanoPi-NEO2 4.11.2 #4 SMP Wed Jul 19 17:53:37 CST 2017 aarch64 aarch64 aarch64 G...

My sources.list for my Neo2 with OLED looks like: root@NanoPi-NEO2:/etc/apt# more sources.list deb http://mirrors.ustc.edu.cn/ubuntu-ports/ xenial main multiverse restricted universe deb http://mirrors.ustc.edu.cn/ubuntu-ports/ xenial-backports main multiverse restricted universe deb http://mirrors....

mikemoy wrote:
I I tried this, but on reboot there was an issue with disk size.

issue? Filesystem to small?
Did you try to resize it?
http://www.friendlyarm.net/forum/topic/6504

Nothing ? There are no support on friendlyarm products ? :( you could try: aplay -D plughw:0,0 test.wav [test.wav is your test-sounfile] plughw:0,0 is card 0 device 0 = card 0: Pcm5102a [Pcm5102a], device 0: Playback pcm5102a-hifi-0 [] or create a /etc/asound.conf for ALSA pcm.!default { type hw ca...

....but no News-entry in the Forum :( Some descriptions are not-so-right.... Neo Core2 says the MiniShield would fit in a RPi3 Case....but the Audio-Port and the USB-Port are on a other place.... Neo Core2 text show also 512MB - but the featute-icons show only 1GB Ram. Neo Core2 Feature-Icons show O...

IF you go to the download section there is nanopi-neo-air_debian-nas-jessie_4.11.2_20171102.img.zip There is no "flasher" for this, so how does one put this image into eMMC ? Maybe you could boot from MicroSD, mounting a USB-Stick which has the nas.img on it and do a dd to the eMMC-device...

I’m a bit new to this and yes I know it says “1-bay” but I’m wanting to have at least two drives (SSDs really) in a NAS and was wondering if this is possible with this kit, or maybe multiple kits. The USB 3.0 SATA Controller is connected via USB internally. You could try to connect internally to a ...

aa305 wrote:
Is rootfs on usb at all possible (usb boot or rootfs on USB stick)? If so, can anyone share the method please.

take a look at the following thread
viewtopic.php?f=58&p=3199#p3199

Its for another model, but you could get the idea how it could work

After flashing the card (using USB Image Writer - on LinuxMint) I put the card in Any pointers on what might be wrong? I dont know the "USB Image Writer", but on Linux (32 or 64 bit) you coul also use Ether: https://etcher.io/ to write the .img to the uSD-Card. Normally the Neo2 should ge...

You could try to dd a image of the sdcard to the emmc: 1.) boot from sd-card 2.) insert a USB-Stick with a .img file of the sdcard in the USB-Port 3.) mkdir /mnt/sda1 4.) mnt /dev/sda1 /mnt/sda1 5.) dd if=/mnt/sda1/[name_of_the_image].img of=/dev/mmcblk0 bs=1M && sync 6.) to be sure: sync [+...

I have 2 Neo2 with self-soldered headers and they work fine with the NAS case as SAMBA server using armbian (debian stretch version). Got around 36MB/sec with 2 different 2.5" harddiscs (no SSD): https://dl.armbian.com/nanopineo2/Debian_stretch_next_nightly.7z Linux nanopineo2 4.13.13-sunxi64 #...

did you get the same errors when using

ifconfig eth0 down
ifconfig eth0 up
ifconfig wlan0 down
ifconfig wlan0 up
ifconfig -a

Anybody have any leads for installation of FreeBSD installer for any of these platforms? I have a NanoPi Neo2 and would love to get FreeBSD installed. In fact I know of a company that would purchase many of these if FreeBSD could be installed. It's an industrial OS that's preferred, and very very s...

mikemoy wrote:
And scroll down until you get to Boot System from SSD
.

Does the boot work without a TF/uSD-Card? and does it boot a TF/uSD-Card when inserted?
Sounds like a u-boot setting.....

if I use the command ifconfig, with the plugged wlan stick not as wlan0, but is displayed as wlxe84e06454862. It is a EDUP Stick with a RTL8192CU Chipset. wlxe84e06454862 wifi connected MyWLan The Config was done with sudo nmcli dev wifi connect "SSID" password "PASSWORD". But I...

Would you please check with the vendor to see when they plan to support Linux 4.x? Did you try the vendor-files from September? https://www.mediafire.com/folder/gg764iwvfm0mf/S5P6818 https://www.mediafire.com/folder/gg764iwvfm0mf/S5P6818#55r9ia83353xs or the file from today?: s5p6818-FriendlyCore-X...

Could anyone tell me at which USB-Controller this port is connected? As I could enable the Controllers 0,2 and 3 I think the port is at controller 1 see also https://forum.armbian.com/index.php?/topic/5256-edit-neo2-only-2-usb-ports-working-female-a-and-usb2-pin-header/ The port which is connected ...

Hi Igor, at the armbian NanoPi Duo page there is only a link button for the xenial ubuntu not for the stretch version. But I did get the stretch version out of the same directory while editing the url: https://dl.armbian.com/nanopiduo/Debian_stretch_next_nightly.7z PS: stretch-version installed: _ _...

at the wiki-page http://wiki.friendlyarm.com/wiki/index.php/1-bay_NAS_Dock_v1.2_for_NanoPi_NEO/NEO2 is only the old USB2.0 JM20329 to SATA version mentioned, but not the new actual (with aluminum case) with USB3.0 JMS567: http://www.friendlyarm.com/index.php?route=product/product&product_id=192 ...

Hi, I have a NanoPi Neo running on Ubuntu 15.10 (GNU/Linux 3.4.39-h3 armv7l). Onboard Audio (Line Out and MIC) is not working. What can I do? Did you check your pin-connections for Audio/Mic against "V1.1/V1.2 Audio" not NanoPi-NEO ( Pin 8-12 on Neo <v1.1), but NanoPi-NEO V1.1/V1.2 at the...

I've just received a 'NanoPi Neo' board. image s5p4418-ubuntu-core-qte-sd8g-20171017.img.zip and burned a Kingstone 8GB class 10 micro sd card. Am I missing something? Yes :) your are downloaded a image for another cpu "s5p4418" For the NanoPi Neo (not 2 nor 2 plus nor NanoPi2 /NanoPi 2 F...

here are also instructions how to use the complete mSATA as root / (not only partition2 if you clone from uSD to mSATA) while the uSD is /boot https://www.cnx-software.com/2017/10/30/nanopi-duo-quick-start-guide-ubuntu-breadboard-mini-shield-msata-ssd/#nanopi-duo-with-mini-shield-and-ssd search on t...

Iam using the NAS case without the FriendlyARM rom/image but armbian. I did get the JMicro HDD controller enabled, but - by now - not the right Frontside USB-Port :( Could anyone tell me at which USB-Controller this port is connected? As I could enable the Controllers 0,2 and 3 I think the port is a...

and not the Friedly-ARM-Image (ROM)... https://forum.armbian.com/index.php?/topic/5521-nanopi-neo2-and-neo-station-ns-120b-with-armbian/ and https://forum.armbian.com/index.php?/topic/5256-edit-neo2-only-2-usb-ports-working-female-a-and-usb2-pin-header/ with Kernel 4.13: Linux nanoneo2 4.13.9-sunxi6...

If I want to connect this board to a laptop / PC: via Ethernet (directly): 1) Do I need a crossover cable or a normal patch cable? 2) In the laptop / PC Network settings, do I need to leave the TCP/IPv4 setting to DHCP (IP address automatically) or do I need to adjust to manual? 3) If I need to inp...

Better try with
https://www.armbian.com/nanopi-neo/
or
http://dietpi.com

which delivers a more complete linux .)

HW decoder for Ubuntu Xenial Xerus 16.04 LXDE OS Image (A64) https://github.com/avafinger/cedrusH264_vdpau_A64 This is a deb package for the A64 OS image providing HW decoding on mplayer. Tested and running on the following devices (1080P hdmi): BananaPi M64 NanoPi A64 Pine64 OPI Win A64 Instructio...

After months of hard work, Armbian has come out with first stable test image (CLI or desktop) with a modern kernel 4.13.5. Welcome to check out what and how it works. Beware that (minor) troubles are still expected - but now we would like to hunt them. This means the nanopi-neo2_debian-core-jessie_...

Today I did get my NanoPi A64 - but both Ubuntu-Images at the FriendlyARM page are only Ubuntu 15.10 Wily Werewolf Images (Mate and QT-Core) where the sources for updateing via apt arent available anymore ( Error 404 ) :( So I did serach for another OS for the NanoPi A64.... armbian nor DietPi not a...

Hi, I am sorry we have no much time developpoing Ubuntu Mate. we recommend Ubuntu Core for the NanoPi A64 board. Or you can find other open source community about Allwinner A64 wouldnt it be better to remove the Mate-Image? - because the sources for Ubuntu Wily Werewolf (15.10) arent available anym...

Hi Guidol! Thank you so much for your answer. Now I have another question, How can I change the debug port to the usb otg port?. As you can see, I'm kind of new with linux. Hi, that wouldnt be easy :( On a Raspberry Pi you could use the otg-port as normal network port like eth0 (not serial). You co...

you dont need to resize the msata sdd if you format the ssd normally and then recursively copy the uSD to the ssd and then change the boot argument!?

Search found 216 matches