A detailed comparison of the NanoPC-T2/T3 boards with others

[FATechsupport]

Here is an interesting post comparing the NanoPC-T2/T3 and other popular boards:
http://wiki.ant-computing.com/Choosing_ ... .2F05.2F21

[ElectricJoe]

Was nicely surprised when discovering FriendlyARM. You have quite a lineup on little boards. An overview/comparison of key features and performance would help a great deal to familiarize oneself with this lineup. Or did I miss that overview table?

[FATechsupport]

Hi here a very informational post which you might be interested in:
http://wiki.ant-computing.com/Choosing_ ... build_farm

[opmalac5]

Yes, it indeed is very interesting. I need to have a closer look at this. Thanks for sharing.

[Jeremy77]

Thanks for the comparison! Pretty useful!

[ibraheem.alkilanny]

Rebuilding a PCB using nanopi T2

Dear

I am asking if I can build my own custom PCB with some adds/deletes in the ICs used in T2. I know that the software is already open source (linux, android, u-boot, ...), but I would like to use some ICs from your board like "Samsung Quad Core Cortex-A9 S5P4418 SoC" from my PCB.

The question is, many drivers from your code are binary (closed source), can I use them in my custom built PCB to use the same ICs in your board T2 ? Or do I need further permissions?

Please let me know. Thank you