Page 1 of 1
Adding LAN port over GPIO
Posted: Sat Nov 10, 2018 6:25 am
by Wisnu
Hi every body, i have 4 pieces of Nanopi 2 but i need ethernet connection to HUB, could i have any solution ? Because this is my first time working with SBC, and i trust nanopi has better perfomance
Re: Adding LAN port over GPIO
Posted: Tue Nov 13, 2018 9:07 pm
by NicoD
Hi. Are you sure it's the NanoPi 2 or any other NanoPi Neo2/S2/DUO2/... The NanoPi 2 is old and isn't sold anymore.
Best to use a usb to ethernet adapter with the NanoPi 2. I don't know of the availabillity of drivers for it.
I don't see any ethernet break-out pins on it.
Good luck.
Re: Adding LAN port over GPIO
Posted: Sun Jan 13, 2019 3:37 am
by Wisnu
i have enc82j60 adapter for it, but still unuseable. but thank you for your information nico
Re: Adding LAN port over GPIO
Posted: Mon Jun 17, 2019 7:00 pm
by sakija
U can buy and micro USB Ethernet adaptor that already has 3 additional USB ports attached to it for about 4 to 9 US dollarsSarkari Result Pnr Status 192.168.1.1