mini2440 -usb download problem
Posted: Sat May 14, 2016 9:31 am
I am trying to connect mini2440 (in NOR mode) to my laptop (UBUNTU 14.04
LTS, 64 bit) using USB cable to transfer files.
i am not able to transfer files using 's3c2410_boot_usb'.
i am getting error 'Cannot find QT2410 device in bootloader mode'.
the information output of 'lsusb -v' command is as shown below.
mini2440 board is showing as 'Owon PDS6062T Oscilloscope'
'Bus 002 Device 031: ID 5345:1234 Owon PDS6062T Oscilloscope
Couldn't open device, some information will be missing'
===========================================================================
Bus 002 Device 031: ID 5345:1234 Owon PDS6062T Oscilloscope
Couldn't open device, some information will be missing
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 255 Vendor Specific Class
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x5345 Owon
idProduct 0x1234 PDS6062T Oscilloscope
bcdDevice 1.00
iManufacturer 1
iProduct 2
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 32
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xc0
Self Powered
MaxPower 50mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0020 1x 32 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0020 1x 32 bytes
bInterval 0
=======================================================================
Can any one help me on how to solve this problem?
Is there any driver instalation process in ubuntu 64 bit os?
LTS, 64 bit) using USB cable to transfer files.
i am not able to transfer files using 's3c2410_boot_usb'.
i am getting error 'Cannot find QT2410 device in bootloader mode'.
the information output of 'lsusb -v' command is as shown below.
mini2440 board is showing as 'Owon PDS6062T Oscilloscope'
'Bus 002 Device 031: ID 5345:1234 Owon PDS6062T Oscilloscope
Couldn't open device, some information will be missing'
===========================================================================
Bus 002 Device 031: ID 5345:1234 Owon PDS6062T Oscilloscope
Couldn't open device, some information will be missing
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 255 Vendor Specific Class
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x5345 Owon
idProduct 0x1234 PDS6062T Oscilloscope
bcdDevice 1.00
iManufacturer 1
iProduct 2
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 32
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xc0
Self Powered
MaxPower 50mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0020 1x 32 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0020 1x 32 bytes
bInterval 0
=======================================================================
Can any one help me on how to solve this problem?
Is there any driver instalation process in ubuntu 64 bit os?