NanoPi NEO2 Cross Compile
Posted: Tue Jun 20, 2017 1:38 am
I'm following the instructions to cross-compile here:
http://wiki.friendlyarm.com/wiki/index.php/NanoPi_NEO2#Install_Cross_Compiler
I've gotten to the point where I'm running the following:
Here's my output:
Here's some system info:
Any help/guidance as to what's causing this error would be great.
http://wiki.friendlyarm.com/wiki/index.php/NanoPi_NEO2#Install_Cross_Compiler
I've gotten to the point where I'm running the following:
Code: Select all
cd lichee/fa_tools
./build.sh -b nanopi-neo2 -p linux -t allHere's my output:
Code: Select all
'/home/tron/lichee/tools/pack/chips/sun50iw2p1/configs/cheetah-p1/board/sys_config_nanopi-neo2.fex' -> '/home/tron/lichee/tools/pack/chips/sun50iw2p1/configs/cheetah-p1/sys_config.fex'
Prepare toolchain ...
Configuring for sun50iw2p1 - Board: sun50iw2p1, Options: SUN50IW2P1
Makefile:1210: *** missing separator. Stop.Here's some system info:
Code: Select all
Linux ChromeTron 4.8.17-galliumos #1 SMP PREEMPT galliumos4 Thu Feb 23 02:27:28 UTC 2017 x86_64 x86_64 x86_64 GNU/LinuxAny help/guidance as to what's causing this error would be great.