"jjm
Hello,
Maybe the board power supply shortage,can you give me the log information of the board?And A 5V/2A power is a must.
"
Here it is, the complete boot log and the power off android process.
** PS:
The board is powered by PSU-ONECOM, and 5V 2A
--------------------------------------------------------------------------------
Second Boot by Nexell Co. : Ver0.6.1 - Built on Oct 16 2015 13:42:17
--------------------------------------------------------------------------------
EMA VALUE : 001
123
Lock value = 156
GATE CYC = 0x00008421
GATE CODE = 0x3A3A3A3A
Read DQ = 0x08080808
Write DQ = 0x08080808
Loading from sdmmc...
Image Loading Done!
Launch to 0x42C00000
U-Boot 2014.07-gb44132b (Jan 19 2016 - 17:35:14)
PLL : [0] = 550000000, [1] = 800000000, [2] = 800000000, [3] = 614399000
PLL1: CPU FCLK = 800000000, HCLK = 200000000
PLL2: BUS BCLK = 400000000, PCLK = 200000000
PLL2: MEM MCLK = 800000000, DCLK = 800000000, BCLK = 400000000, PCLK = 200000000
PLL0: G3D BCLK = 550000000
PLL2: MPG BCLK = 400000000, PCLK = 200000000
I2C: ready
DRAM: 256 MiB
Heap = 0x43000000~0x45000000
Code = 0x42c00000~0x42c73984
GLD = 0x42bffeb8
GLBD = 0x42bffe68
SP = 0x42bffe68,0x42bffe50(CURR)
PC = 0x42c06114
TAGS = 0x40000100
PAGE = 0x42c80000~0x42c8c000
MACH = [4330]
VER = 1
BOARD= [nanopi2]
LCD = N/A (-1)
MMC: NXP DWMMC: 0, NXP DWMMC: 1, NXP DWMMC: 2
In: serial
Out: serial
Err: serial
switch to partitions #0, OK
mmc0 is current device
HDMI: display.0, preset 0 (1280 * 720)
HDMI: PHY Ready!!!
DONE: Logo bmp 800 by 480 (3bpp), len=1152056
DRAW: 0x47000000 -> 0x46000000
Hit any key to stop autoboot: 1 0
## Booting kernel from Legacy Image at 48000000 ...
Image Name: Linux-3.4.39-FriendlyARM
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 4554528 Bytes = 4.3 MiB
Load Address: 40008000
Entry Point: 40008000
Verifying Checksum ... OK
Loading Kernel Image ... OK
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.4.39-FriendlyARM (root@jensen) (gcc version 4.9.3 (ctng-1.21.0-229g-FA) ) #1 SMP PREEMPT Thu May 19 15:27:41 HKT 2016
[ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine: NANOPI2
[ 0.000000] Display: HDMI selected
[ 0.000000] nxp_reserve_mem: reserve CMA: size 201326592
[ 0.000000] NXP/CMA: Reserved 0x63600000/0x0c000000 for 'ion'
[ 0.000000] NXP/CMA: success register cma region for 'ion'
[ 0.000000] rquest persistent memory from 635fc000 (00000000)-00004000
[ 0.000000] Initialized persistent memory from 635fc000-635fffff
[ 0.000000] Memory policy: ECC disabled, Data cache writealloc
[ 0.000000] CPU : iomap[ 0]: p 0xc0000000 -> v 0xf0000000 len=0x300000
[ 0.000000] CPU : iomap[ 1]: p 0xf0000000 -> v 0xf0300000 len=0x100000
[ 0.000000] CPU : iomap[ 2]: p 0xcf000000 -> v 0xf0400000 len=0x100000
[ 0.000000] CPU : iomap[ 3]: p 0x2c000000 -> v 0xf0500000 len=0x100000
[ 0.000000] CPU : iomap[ 4]: p 0x00000000 -> v 0xf0600000 len=0x100000
[ 0.000000] CPU : DMA Zone Size =16M, CORE 4
[ 0.000000] CPU : VERSION = 2 (0xE153000A), Assign Peripheral Exclusive Bus
[ 0.000000] s5p4418-NanoPi2: Board initialized
[ 0.000000] CPU : Clock Generator= 64 EA, DVFS = support, PLL.1
[ 0.000000] PLL : [0] = 550000000, [1] = 800000000, [2] = 800000000, [3] = 614399000
[ 0.000000] PLL1: CPU FCLK = 800000000, HCLK = 200000000
[ 0.000000] PLL2: BUS BCLK = 400000000, PCLK = 200000000
[ 0.000000] PLL2: MEM MCLK = 800000000, DCLK = 800000000, BCLK = 400000000, PCLK = 200000000
[ 0.000000] PLL0: G3D BCLK = 550000000
[ 0.000000] PLL2: MPG BCLK = 400000000, PCLK = 200000000
[ 0.000000] PERCPU: Embedded 8 pages/cpu @c13df000 s12288 r8192 d12288 u32768
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259839
[ 0.000000] Kernel command line: console=ttyAMA0,115200n8 androidboot.console=ttyAMA0 androidboot.serialno=0123456789abcdef initrd=0x49000000,0x100000 lcd=HDMI720P60
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] allocated 2097152 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Memory: 1024MB = 1024MB total
[ 0.000000] Memory: 827592k/827592k available, 220984k reserved, 272384K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xef800000 - 0xfee00000 ( 246 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xef600000 ( 758 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc084e5f4 (8474 kB)
[ 0.000000] .init : 0xc084f000 - 0xc0886000 ( 220 kB)
[ 0.000000] .data : 0xc0886000 - 0xc08fbf78 ( 472 kB)
[ 0.000000] .bss : 0xc08fbf9c - 0xc0ad56c0 (1894 kB)
[ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] NR_IRQS:288
[ 0.000000] VIC @f0002000: id 0x00041192, vendor 0x41
[ 0.000000] VIC @f0003000: id 0x00041192, vendor 0x41
[ 0.000000] GPIO @f001a000: start 64, mask 0xffffffff (gpio 53)
[ 0.000000] GPIO @f001b000: start 96, mask 0xffffffff (gpio 54)
[ 0.000000] GPIO @f001c000: start 128, mask 0xffffffff (gpio 55)
[ 0.000000] GPIO @f001d000: start 160, mask 0xffffffff (gpio 56)
[ 0.000000] GPIO @f001e000: start 192, mask 0xffffffff (gpio 57)
[ 0.000000] ALIVE @f0010800: start 224, mask 0x000000ff (alive 4)
[ 0.000000] GIC @f0301000: start 256 (vic 31)
[ 0.000000] timer.0: source, 10000000(HZ:250), mult:3355443200
[ 0.000000] timer.1: event , 10000000(HZ:250), mult:42949673
[ 0.000000] sched_clock: 32 bits at 250 Hz, resolution 4000000ns, wraps every 4294967292ms
[ 0.000000] Calibrating delay loop... 1594.36 BogoMIPS (lpj=3188736)
[ 0.048000] pid_max: default: 32768 minimum: 301
[ 0.048000] Security Framework initialized
[ 0.048000] SELinux: Initializing.
[ 0.048000] Mount-cache hash table entries: 512
[ 0.048000] Initializing cgroup subsys debug
[ 0.048000] Initializing cgroup subsys cpuacct
[ 0.048000] Initializing cgroup subsys memory
[ 0.048000] Initializing cgroup subsys freezer
[ 0.048000] CPU: Testing write buffer coherency: ok
[ 0.048000] CPU0: thread -1, cpu 0, socket 10, mpidr 80000a00
[ 0.048000] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[ 0.048000] Setting up static identity map for 0x40603c50 - 0x40603ca8
[ 0.048000] L310 cache controller enabled
[ 0.048000] l2x0: 16 ways, CACHE_ID 0x4100c4c8, AUX_CTRL 0x70470001, Cache size: 1048576 B
[ 0.092000] CPU1: thread -1, cpu 1, socket 10, mpidr 80000a01
[ 0.132000] CPU2: thread -1, cpu 2, socket 10, mpidr 80000a02
[ 0.172000] CPU3: thread -1, cpu 3, socket 10, mpidr 80000a03
[ 0.176000] Brought up 4 CPUs
[ 0.176000] SMP: Total of 4 processors activated (6377.47 BogoMIPS).
[ 0.180000] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[ 0.180000] pwm: max = 50000000 hz
[ 0.180000] prepare_gpio_suspend:
[ 0.180000] alfn[0][0]: 0x00000000, alfn[0][1]: 0x00000000
[ 0.180000] alfn[1][0]: 0x66800000, alfn[1][1]: 0x55555566
[ 0.180000] alfn[2][0]: 0x55555555, alfn[2][1]: 0x00555555
[ 0.180000] alfn[3][0]: 0x00000000, alfn[3][1]: 0x00000000
[ 0.180000] alfn[4][0]: 0x00000000, alfn[4][1]: 0x55540000
[ 0.184000] dummy:
[ 0.184000] NET: Registered protocol family 16
[ 0.184000] persistent_ram: uncorrectable error in header
[ 0.184000] persistent_ram: no valid data in buffer (sig = 0xffe8ff00)
[ 0.188000] console [ram-1] enabled
[ 0.188000] [Register machine platform devices]
[ 0.188000] mach: add amba device uart-pl011.0
[ 0.192000] mach: add amba device uart-pl011.1
[ 0.192000] mach: add amba device uart-pl011.3
[ 0.192000] mach: add amba device uart-pl011.4
[ 0.192000] mach: add amba device pl08xdmac.0
[ 0.192000] mach: add amba device pl08xdmac.1
[ 0.192000] mach: add amba device ssp-pl022.0
[ 0.196000] mach: add device syncgen [2]
[ 0.196000] mach: add device lcd
[ 0.196000] mach: add device i2c bus (array:3)
[ 0.196000] mach: add device Real Time Clock
[ 0.196000] mach: add device generic pwm (array:2)
[ 0.196000] mach: add device generic gpio (array:6)
[ 0.196000] mach: add device i2s (array:1)
[ 0.196000] mach: add device spdif tx
[ 0.196000] mach: add device usb_ehci
[ 0.196000] mach: add device usb_ohci
[ 0.196000] mach: add device usb otg
[ 0.196000] mach: add device ion-nxp
[ 0.196000] mach: add device adc
[ 0.196000] mach: add graphic device opengl|es
[ 0.196000] [Register board platform devices]
[ 0.196000] plat: board revision 5
[ 0.196000] plat: add dynamic frequency (pll.1)
[ 0.196000] plat: add device adc temp
[ 0.196000] plat: add framebuffer
[ 0.196000] plat: boot from mmc.0
[ 0.196000] plat: add device sdmmc [0]
[ 0.200000] plat: add backlight pwm device
[ 0.200000] plat: add device keypad
[ 0.200000] plat: add device spdif playback
[ 0.200000] plat: add device asoc-es8316
[ 0.200000] plat: add device nxp-v4l2
[ 0.204000] plat: register spidev
[ 0.204000] plat: add touch(ft5x0x) device
[ 0.204000] plat: add touch(it7260) device
[ 0.204000] plat: add onewire ts device
[ 0.204000] plat: add device hdmi-cec
[ 0.204000] plat: add device nxp-gmac
[ 0.204000] plat: add device gpio_led
[ 0.204000]
[ 0.204000] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[ 0.204000] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.204000] Serial: AMBA PL011 UART driver
[ 0.204000] uart-pl011.0: ttyAMA0 at MMIO 0xc00a1000 (irq = 7) is a PL011 rev3
[ 0.208000] console [ttyAMA0] enabled
[ 0.212000] uart-pl011.1: ttyAMA1 at MMIO 0xc00a0000 (irq = 6) is a PL011 rev3
[ 0.216000] uart-pl011.3: ttyAMA2 at MMIO 0xc00a3000 (irq = 9) is a PL011 rev3
[ 0.220000] uart-pl011.4: ttyAMA3 at MMIO 0xc006d000 (irq = 10) is a PL011 rev3
[ 0.240000] bio: create slab <bio-0> at 0
[ 0.248000] gpiochip_add: registered GPIOs 0 to 31 on device: GPIOA
[ 0.252000] gpiochip_add: registered GPIOs 32 to 63 on device: GPIOB
[ 0.256000] gpiochip_add: registered GPIOs 64 to 95 on device: GPIOC
[ 0.260000] gpiochip_add: registered GPIOs 96 to 127 on device: GPIOD
[ 0.264000] gpiochip_add: registered GPIOs 128 to 159 on device: GPIOE
[ 0.268000] gpiochip_add: registered GPIOs 160 to 167 on device: GPIOALV
[ 0.272000] pl08xdmac pl08xdmac.0: Unbalanced pm_runtime_enable!
[ 0.276000] pl08xdmac pl08xdmac.0: initialized 8 virtual memcpy channels
[ 0.280000] pl08xdmac pl08xdmac.0: initialized 16 virtual slave channels
[ 0.288000] pl08xdmac pl08xdmac.0: DMA: PL080 rev1 at 0xc0000000 irq 1
[ 0.292000] pl08xdmac pl08xdmac.1: Unbalanced pm_runtime_enable!
[ 0.296000] pl08xdmac pl08xdmac.1: initialized 8 virtual memcpy channels
[ 0.300000] pl08xdmac pl08xdmac.1: initialized 15 virtual slave channels
[ 0.308000] pl08xdmac pl08xdmac.1: DMA: PL080 rev1 at 0xc0001000 irq 2
[ 0.312000] nxp_ion_probe success!!!
[ 0.316000] SCSI subsystem initialized
[ 0.320000] ssp-pl022 ssp-pl022.0: ARM PL022 driver, device ID: 0x00041022
[ 0.324000] pl022: mapped registers from 0xc005b000 to f005b000
[ 0.328000] ssp-pl022 ssp-pl022.0: setup for DMA on RX dma1chan7, TX dma1chan6
[ 0.332000] ssp-pl022 ssp-pl022.0: will use autosuspend for runtime pm, delay 10ms
[ 0.336000] usbcore: registered new interface driver usbfs
[ 0.340000] usbcore: registered new interface driver hub
[ 0.344000] usbcore: registered new device driver usb
[ 0.348000] i2c-gpio i2c-gpio.3: using pins 159 (SDA) and 158 (SCL)
[ 0.356000] nxp-i2c.0: 390625 hz [pclk=200000000, clk = 256, scale= 1, timeout= 500 ms]
[ 0.360000] nxp-i2c.1: 97656 hz [pclk=200000000, clk = 256, scale= 7, timeout= 500 ms]
[ 0.364000] nxp-i2c.2: 195312 hz [pclk=200000000, clk = 256, scale= 3, timeout= 500 ms]
[ 0.368000] Linux media interface: v0.10
[ 0.372000] Linux video capture interface: v2.00
[ 0.376000] pps_core: LinuxPPS API ver. 1 registered
[ 0.380000] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.384000] PTP clock support registered
[ 0.396000] axp_mfd 3-0034: AXP (CHIP ID: 0x06) detected
[ 0.404000] axp22_ldo1: 3000 mV
[ 0.412000] axp22_aldo1: 700 <--> 3300 mV at 3300 mV
[ 0.420000] axp22_aldo2: 700 <--> 3300 mV at 1800 mV
[ 0.428000] axp22_aldo3: 700 <--> 3300 mV at 1000 mV
[ 0.436000] axp22_dldo1: 700 <--> 3300 mV at 3300 mV
[ 0.440000] axp22_dldo2: No configuration
[ 0.448000] axp22_dldo2: 700 <--> 3300 mV at 700 mV
[ 0.452000] axp22_dldo3: No configuration
[ 0.460000] axp22_dldo3: 700 <--> 3300 mV at 700 mV
[ 0.464000] axp22_dldo4: No configuration
[ 0.468000] axp22_dldo4: 700 <--> 3300 mV at 700 mV
[ 0.476000] axp22_eldo1: 700 <--> 3300 mV at 1800 mV
[ 0.484000] axp22_eldo2: 700 <--> 3300 mV at 3300 mV
[ 0.488000] axp22_eldo3: No configuration
[ 0.492000] axp22_eldo3: 700 <--> 3300 mV at 700 mV
[ 0.500000] axp22_dc5ldo: No configuration
[ 0.504000] axp22_dc5ldo: 700 <--> 1400 mV at 1200 mV
[ 0.512000] axp22_dcdc1: 1600 <--> 3400 mV at 3300 mV
[ 0.516000] axp22_dcdc2: 600 <--> 1540 mV at 1200 mV
[ 0.524000] axp22_dcdc3: 600 <--> 1860 mV at 1200 mV
[ 0.532000] axp22_dcdc4: 600 <--> 1540 mV at 1500 mV
[ 0.540000] axp22_dcdc5: 1000 <--> 2550 mV at 1500 mV
[ 0.544000] axp22_ldoio0: 700 <--> 3300 mV at 3800 mV
[ 0.548000] axp22_ldoio1: 700 <--> 3300 mV at 3800 mV
[ 0.556000] Advanced Linux Sound Architecture Driver Version 1.0.25.
[ 0.560000] Bluetooth: Core ver 2.16
[ 0.564000] NET: Registered protocol family 31
[ 0.568000] Bluetooth: HCI device and connection manager initialized
[ 0.572000] Bluetooth: HCI socket layer initialized
[ 0.576000] Bluetooth: L2CAP socket layer initialized
[ 0.580000] Bluetooth: SCO socket layer initialized
[ 0.584000] cfg80211: Calling CRDA to update world regulatory domain
[ 0.584000] Switching to clocksource source timer
[ 0.604000] NET: Registered protocol family 2
[ 0.608000] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.616000] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.628000] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
[ 0.636000] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.640000] TCP: reno registered
[ 0.644000] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.652000] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.656000] NET: Registered protocol family 1
[ 0.664000] RPC: Registered named UNIX socket transport module.
[ 0.668000] RPC: Registered udp transport module.
[ 0.672000] RPC: Registered tcp transport module.
[ 0.680000] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.684000] Unpacking initramfs...
[ 0.728000] Initramfs unpacking failed: junk in compressed archive
[ 0.736000] Freeing initrd memory: 1024K
[ 0.740000] Disply Reset Status : On
[ 0.744000] Display LCD register operation
[ 0.748000] Display.0 fps=59 (16 ms), wait= 6 jiffies, Pixelclk=57142857hz
[ 0.756000] LCD : [1]=LCD connect to [5]=SYNCGEN0
[ 0.760000] audit: initializing netlink socket (disabled)
[ 0.768000] type=2000 audit(0.768:1): initialized
[ 0.772000] highmem bounce pool size: 64 pages
[ 0.784000] NFS: Registering the id_resolver key type
[ 0.792000] fuse init (API version 7.18)
[ 0.796000] msgmni has been set to 1086
[ 0.800000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 0.808000] io scheduler noop registered
[ 0.812000] io scheduler deadline registered
[ 0.816000] io scheduler cfq registered (default)
[ 0.824000] display.0 connected to fb.0 ...
[ 0.828000] nxp-fb.0: dma addr = 0x63600000, buf[0xe32d2e00]
[ 0.832000] nxp-fb.0: dma addr = 0x63984000, buf[0xe32d2fc0]
[ 0.840000] nxp-fb.0: dma addr = 0x63d08000, buf[0xe32d3140]
[ 0.928000] nxp-fb 0: out[0], 1280 * 720 - 32 bpp (phys:63600000 virt:0xe3600000 max:11059200)
[ 0.940000] uart-pl011 uart-pl011.0: no DMA platform data
[ 0.944000] uart-pl011 uart-pl011.1: no DMA platform data
[ 0.948000] uart-pl011 uart-pl011.3: no DMA platform data
[ 0.956000] uart-pl011 uart-pl011.4: no DMA platform data
[ 0.964000] loop: module loaded
[ 0.968000] tun: Universal TUN/TAP device driver, 1.6
[ 0.972000] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.980000] -- nxpmac initialize --
[ 0.984000] stmmac - user ID: 0x37, Synopsys ID: 0x37
[ 0.988000] Ring mode enabled
[ 0.992000] DMA HW capability register supported
[ 0.996000] Enhanced/Alternate descriptors
[ 1.000000] Enabled extended descriptors
[ 1.004000] RX Checksum Offload Engine supported (type 2)
[ 1.012000] TX Checksum insertion supported
[ 1.016000] Wake-Up On Lan supported
[ 1.020000] Enable RX Mitigation via HW Watchdog Timer
[ 1.060000] stmmac: probed
[ 1.064000] eth0: PHY ID 001cc915 at 0 IRQ 215 (stmmac-0:00)
[ 1.068000] eth0: PHY ID 001cc915 at 7 IRQ 215 (stmmac-0:07) active
[ 1.076000] PPP generic driver version 2.4.2
[ 1.080000] PPP BSD Compression module registered
[ 1.084000] PPP Deflate Compression module registered
[ 1.092000] PPP MPPE Compression module registered
[ 1.096000] NET: Registered protocol family 24
[ 1.100000] usbcore: registered new interface driver asix
[ 1.108000] usbcore: registered new interface driver cdc_ether
[ 1.112000] usbcore: registered new interface driver net1080
[ 1.116000] usbcore: registered new interface driver cdc_subset
[ 1.124000] usbcore: registered new interface driver zaurus
[ 1.128000] usbcore: registered new interface driver cdc_ncm
[ 1.136000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.144000] nxp-ehci nxp-ehci: SLsi Synopsys EHCI Host Controller
[ 1.148000] nxp-ehci nxp-ehci: new USB bus registered, assigned bus number 1
[ 1.156000] nxp-ehci nxp-ehci: irq 50, io mem 0xc0030000
[ 1.172000] nxp-ehci nxp-ehci: USB 0.0 started, EHCI 1.00
[ 1.176000] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.184000] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.188000] usb usb1: Product: SLsi Synopsys EHCI Host Controller
[ 1.196000] usb usb1: Manufacturer: Linux 3.4.39-FriendlyARM ehci_hcd
[ 1.204000] usb usb1: SerialNumber: nxp-ehci
[ 1.208000] hub 1-0:1.0: USB hub found
[ 1.212000] hub 1-0:1.0: 3 ports detected
[ 1.216000] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[ 1.420000] Core Release: 2.93a
[ 1.424000] Setting default values for core params
[ 1.428000] Finished setting default values for core params
[ 1.528000] usb 1-1: new high-speed USB device number 2 using nxp-ehci
[ 1.636000] Using Buffer DMA mode
[ 1.640000] Dedicated Tx FIFOs mode
[ 1.644000] dwc_otg dwc_otg: DWC OTG Controller
[ 1.648000] dwc_otg dwc_otg: new USB bus registered, assigned bus number 2
[ 1.656000] dwc_otg dwc_otg: irq 49, io mem 0x00000000
[ 1.660000] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.664000] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608
[ 1.664000] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 1.664000] usb 1-1: Product: USB2.0 Hub
[ 1.664000] hub 1-1:1.0: USB hub found
[ 1.664000] hub 1-1:1.0: 4 ports detected
[ 1.692000] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.700000] usb usb2: Product: DWC OTG Controller
[ 1.704000] usb usb2: Manufacturer: Linux 3.4.39-FriendlyARM dwc_otg_hcd
[ 1.712000] usb usb2: SerialNumber: dwc_otg
[ 1.716000] hub 2-0:1.0: USB hub found
[ 1.720000] hub 2-0:1.0: 1 port detected
[ 1.724000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.732000] nxp-ohci nxp-ohci: SLsi Synopsys OHCI Host Controller
[ 1.736000] nxp-ohci nxp-ohci: new USB bus registered, assigned bus number 3
[ 1.744000] nxp-ohci nxp-ohci: irq 50, io mem 0xc0020000
[ 1.808000] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.812000] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.820000] usb usb3: Product: SLsi Synopsys OHCI Host Controller
[ 1.828000] usb usb3: Manufacturer: Linux 3.4.39-FriendlyARM ohci_hcd
[ 1.832000] usb usb3: SerialNumber: nxp-ohci
[ 1.836000] hub 3-0:1.0: USB hub found
[ 1.840000] hub 3-0:1.0: 3 ports detected
[ 1.848000] Initializing USB Mass Storage driver...
[ 1.852000] usbcore: registered new interface driver usb-storage
[ 1.856000] USB Mass Storage support registered.
[ 1.864000] usbcore: registered new interface driver usbserial
[ 1.868000] usbcore: registered new interface driver usbserial_generic
[ 1.876000] USB Serial support registered for generic
[ 1.940000] usb 1-1.1: new high-speed USB device number 3 using nxp-ehci
[ 2.036000] usb 1-1.1: New USB device found, idVendor=05e3, idProduct=0608
[ 2.044000] usb 1-1.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 2.052000] usb 1-1.1: Product: USB2.0 Hub
[ 2.056000] hub 1-1.1:1.0: USB hub found
[ 2.060000] hub 1-1.1:1.0: 4 ports detected
[ 2.068000] usbserial: USB Serial Driver core
[ 2.072000] usbcore: registered new interface driver ch341
[ 2.076000] USB Serial support registered for ch341-uart
[ 2.080000] usbcore: registered new interface driver cp210x
[ 2.088000] USB Serial support registered for cp210x
[ 2.092000] usbcore: registered new interface driver ftdi_sio
[ 2.100000] USB Serial support registered for FTDI USB Serial Device
[ 2.104000] ftdi_sio: v1.6.0:USB FTDI Serial Converters Driver
[ 2.112000] usbcore: registered new interface driver option
[ 2.116000] USB Serial support registered for GSM modem (1-port)
[ 2.124000] usbcore: registered new interface driver pl2303
[ 2.128000] USB Serial support registered for pl2303
[ 2.132000] usbcore: registered new interface driver ti_usb_3410_5052
[ 2.140000] USB Serial support registered for TI USB 3410 1 port adapter
[ 2.148000] USB Serial support registered for TI USB 5052 2 port adapter
[ 2.156000] ti_usb_3410_5052: v0.10:TI USB 3410/5052 Serial Driver
[ 2.160000] android_usb gadget: Mass Storage Function, version: 2009/09/11
[ 2.168000] android_usb gadget: Number of LUNs=1
[ 2.172000] lun0: LUN: removable file: (no medium)
[ 2.180000] android_usb gadget: android_usb ready
[ 2.184000] mousedev: PS/2 mouse device common for all mice
[ 2.188000] input: Nexell Keypad as /devices/platform/nxp-keypad/input/input0
[ 2.196000] usbcore: registered new interface driver xpad
[ 2.204000] i2c-core: driver [IT7260-ts] using legacy suspend method
[ 2.208000] i2c-core: driver [IT7260-ts] using legacy resume method
[ 2.216000] touchscreen-1wire initialized
[ 2.220000] backlight-1wire initialized
[ 2.224000] input: fa_ts_input as /devices/virtual/input/input1
[ 2.232000] ts-if initialized
[ 2.232000] [RTC] day=2016.01.01 time=08:25:02
[ 2.240000] nxp-rtc nxp-rtc.0: rtc core: registered nxp-rtc as rtc0
[ 2.244000] i2c /dev entries driver
[ 2.248000] ...................................ov5640_probe 2234
[ 2.256000] ...................................ov5640_video_probe 2193
[ 2.264000] OV5640 Chip ID 0x5640 detected
[ 2.268000] ov5640_initialize_ctrls.............1794...........
[ 2.276000] nxp_hdmi_cec_probe success
[ 2.280000] device-mapper: uevent: version 1.0.3
[ 2.284000] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised:
dm-devel@redhat.com[ 2.292000] Bluetooth: HCI UART driver ver 2.2
[ 2.296000] Bluetooth: HCI H4 protocol initialized
[ 2.304000] DVFS: ASV[0] IDS(10mA, 8) Ro(110, 84)
[ 2.312000] DVFS: regulator vdd_arm_1.3V
[ 2.316000] DVFS: cpu DVFS with PLL.1 [tables=8]
[ 2.320000] cpuidle: using governor ladder
[ 2.324000] cpuidle: using governor menu
[ 2.328000] Synopsys Designware Multimedia Card Interface Driver
[ 2.336000] dw_mmc dw_mmc.0: Using internal DMA controller.
[ 2.336000] usb 1-1.1.2: new low-speed USB device number 4 using nxp-ehci
[ 2.348000] mmc0: no vmmc regulator found
[ 2.352000] dw_mmc dw_mmc.0: Using external card detect irq 225 (io 161)
[ 2.360000] dw_mmc dw_mmc.0: Version ID is 250a
[ 2.364000] dw_mmc dw_mmc.0: DW MMC controller at irq 43, 32 bit host data width, 32 deep fifo hw timeout 500 ms
[ 2.376000] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63)
[ 2.388000] usbcore: registered new interface driver usbhid
[ 2.392000] usbhid: USB HID core driver
[ 2.396000] ADC: CHs 8, 200000(1000000 ~ 130208) sample rate, polling mode, scale=166(bit 6)
[ 2.408000] ashmem: initialized
[ 2.408000] logger: created 256K log 'log_main'
[ 2.412000] logger: created 256K log 'log_events'
[ 2.420000] logger: created 256K log 'log_radio'
[ 2.424000] logger: created 256K log 'log_system'
[ 2.428000] snd pcm: register sound platform 'nxp-pcm'
[ 2.432000] usb 1-1.1.2: New USB device found, idVendor=1c4f, idProduct=0002
[ 2.432000] usb 1-1.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.432000] usb 1-1.1.2: Product: USB Keyboard
[ 2.432000] usb 1-1.1.2: Manufacturer: SIGMACHIP
[ 2.436000] input: SIGMACHIP USB Keyboard as /devices/platform/nxp-ehci/usb1/1-1/1-1.1/1-1.1.2/1-1.1.2:1.0/input/input2
[ 2.436000] generic-usb 0003:1C4F:0002.0001: input,hidraw0: USB HID v1.10 Keyboard [SIGMACHIP USB Keyboard] on usb-nxp-ehci-1.1.2/input0
[ 2.440000] input: SIGMACHIP USB Keyboard as /devices/platform/nxp-ehci/usb1/1-1/1-1.1/1-1.1.2/1-1.1.2:1.1/input/input3
[ 2.440000] generic-usb 0003:1C4F:0002.0002: input,hidraw1: USB HID v1.10 Device [SIGMACHIP USB Keyboard] on usb-nxp-ehci-1.1.2/input1
[ 2.468000] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0)
[ 2.468000] mmc0: new high speed SDHC card at address aaaa
[ 2.468000] mmcblk0: mmc0:aaaa SL16G 14.8 GiB
[ 2.472000] mmcblk0: p1 p2 p3 p4 < p5 p6 p7 >
[ 2.516000] usb 1-1.1.4: new low-speed USB device number 5 using nxp-ehci
[ 2.536000] snd i2s: ch 0, master, iis mode, 48000(47999)hz, 32 FBITs, MCLK=12287980hz, RFS=256
[ 2.620000] usb 1-1.1.4: New USB device found, idVendor=1267, idProduct=0210
[ 2.628000] usb 1-1.1.4: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 2.636000] usb 1-1.1.4: Product: PS/2+USB Mouse
[ 2.644000] input: PS/2+USB Mouse as /devices/platform/nxp-ehci/usb1/1-1/1-1.1/1-1.1.4/1-1.1.4:1.0/input/input4
[ 2.656000] generic-usb 0003:1267:0210.0003: input,hidraw2: USB HID v1.00 Mouse [PS/2+USB Mouse] on usb-nxp-ehci-1.1.4/input0
[ 2.676000] asoc: ES8316 HiFi <-> nxp-i2s.0 mapping ok
[ 2.684000] spdif-tx: 48000(47348)Hz, MCLK=12121212hz HDMI out
[ 2.692000] asoc: dit-hifi <-> nxp-spdif-tx mapping ok
[ 2.700000] GACT probability NOT on
[ 2.704000] Mirror/redirect action on
[ 2.708000] u32 classifier
[ 2.708000] Actions configured
[ 2.712000] Netfilter messages via NETLINK v0.30.
[ 2.720000] nf_conntrack version 0.5.0 (12947 buckets, 51788 max)
[ 2.724000] ctnetlink v0.93: registering with nfnetlink.
[ 2.732000] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
[ 2.736000] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
[ 2.744000] xt_time: kernel timezone is -0000
[ 2.748000] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 2.752000] arp_tables: (C) 2002 David S. Miller
[ 2.760000] TCP: cubic registered
[ 2.764000] Initializing XFRM netlink socket
[ 2.768000] NET: Registered protocol family 10
[ 2.772000] Mobile IPv6
[ 2.776000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 2.780000] IPv6 over IPv4 tunneling driver
[ 2.784000] NET: Registered protocol family 17
[ 2.788000] NET: Registered protocol family 15
[ 2.792000] Bluetooth: RFCOMM TTY layer initialized
[ 2.800000] Bluetooth: RFCOMM socket layer initialized
[ 2.804000] Bluetooth: RFCOMM ver 1.11
[ 2.808000] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 2.812000] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 2.820000] NET: Registered protocol family 35
[ 2.824000] Registering the dns_resolver key type
[ 2.828000] Registering SWP/SWPB emulation handler
[ 2.836000] axp22_dcdc5: incomplete constraints, leaving on
[ 2.844000] axp22_dcdc4: incomplete constraints, leaving on
[ 2.848000] axp22_dcdc3: incomplete constraints, leaving on
[ 2.856000] axp22_dcdc2: incomplete constraints, leaving on
[ 2.864000] axp22_dcdc1: incomplete constraints, leaving on
[ 2.868000] axp22_dc5ldo: incomplete constraints, leaving on
[ 2.876000] axp22_eldo2: incomplete constraints, leaving on
[ 2.884000] axp22_eldo1: incomplete constraints, leaving on
[ 2.892000] axp22_dldo1: incomplete constraints, leaving on
[ 2.900000] axp22_aldo3: incomplete constraints, leaving on
[ 2.904000] axp22_aldo2: incomplete constraints, leaving on
[ 2.912000] axp22_aldo1: incomplete constraints, leaving on
[ 2.920000] axp22_ldo1: incomplete constraints, leaving on
[ 2.924000] otg_wakelock_init: No USB transceiver found
[ 2.928000] nxp-rtc nxp-rtc.0: setting system clock to 2016-01-01 08:25:02 UTC (1451636702)
[ 2.940000] TMU: register adc.2 to hwmon
[ 2.944000] ALSA device list:
[ 2.944000] #0: I2S-ES8316
[ 2.948000] #1: SPDIF-Transciever
ÿ[ 2.952000] Freeing init memory: 220K
[ 2.956000] Write protecting the kernel text section c0008000 - c0820000
[ 2.964000] rodata_test: attempting to write to read-only section:
[ 2.968000] write to read-only section trapped, success
[ 3.056000] type=1403 audit(1451636702.624:2): policy loaded auid=4294967295 ses=4294967295
[ 3.068000] type=1404 audit(1451636702.636:3): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
[ 3.276000] HDMI HPD State 0x1
[ 3.280000] init: /dev/hw_random not found
ÿ[ 3.304000] find cec header!_edid_find_target_cec_address: cec physical address 2000
[ 3.316000] _hdmi_hpd_changed: edid update success, preset 18
[ 3.424000] init: /dev/hw_random not found
[ 3.444000] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[ 3.452000] fs_mgr: __mount(source=/dev/block/platform/dw_mmc.0/by-num/p2,target=/system,type=ext4)=0
[ 3.480000] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
[ 3.492000] fs_mgr: check_fs(): mount(/dev/block/platform/dw_mmc.0/by-num/p3,/cache,ext4)=0
[ 3.532000] fs_mgr: Running /system/bin/e2fsck on /dev/block/platform/dw_mmc.0/by-num/p3
[ 3.660000] e2fsck: e2fsck 1.42.9 (28-Dec-2013)
[ 3.664000] e2fsck: cache: clean, 15/27392 files, 3539/109568 blocks
[ 3.688000] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=panic
[ 3.696000] fs_mgr: __mount(source=/dev/block/platform/dw_mmc.0/by-num/p3,target=/cache,type=ext4)=0
[ 3.724000] EXT4-fs (mmcblk0p7): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
[ 3.732000] fs_mgr: check_fs(): mount(/dev/block/platform/dw_mmc.0/by-num/p7,/data,ext4)=0
[ 3.788000] fs_mgr: Running /system/bin/e2fsck on /dev/block/platform/dw_mmc.0/by-num/p7
[ 3.836000] e2fsck: e2fsck 1.42.9 (28-Dec-2013)
[ 3.840000] e2fsck: userdata: clean, 873/158720 files, 88612/624468 blocks
[ 3.864000] EXT4-fs (mmcblk0p7): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=panic
[ 3.876000] fs_mgr: __mount(source=/dev/block/platform/dw_mmc.0/by-num/p7,target=/data,type=ext4)=0
[ 3.908000] setting PHY_BASEADDR_POWER_GATE, set 1
[ 3.912000] setting PHY_BASEADDR_PMU_ISOLATE+4, set 0
[ 3.916000] setting PHY_BASEADDR_PMU_ISOLATE+8, set 0
[ 3.924000] setting PHY_BASEADDR_PMU_ISOLATE, set 1
[ 3.928000] read PHY_BASEADDR_PMU_ISOLATE + 0xC
[ 3.932000] Wait Power UP Ack(powerUpAck=0x00000000)
[ 3.940000] setting ClockGen, set 1
[ 3.944000] setting Reset VR addr(0xf0012008)
[ 3.948000] setting PHY_BASEADDR_VR_PMU addr(0xf0072000)
[ 3.952000] Vr: VR device driver loaded(ver1.2) for s5p4418
[ 4.016000] binder: 102:102 transaction failed 29189, size 0-0
ÿ[ 4.140000] init: cannot find '/system/bin/debuggerd64', disabling 'debuggerd64'
[ 4.148000] init: cannot find '/system/bin/rild', disabling 'ril-daemon'
[ 4.164000] init: cannot find '/system/bin/install-recovery.sh', disabling 'flash_recovery'
[ 4.176000] android_usb: already disabled
[ 4.184000] adb_open
[ 4.188000] mtp_bind_config
[ 4.188000] adb_bind_config
shell@nanopi2:/ $ [ 4.736000] logd.auditd: start
[ 5.020000] healthd: No charger supplies found
[ 5.028000] healthd: No battery devices found
[ 5.248000] ov5640_link_setup
[ 5.252000] camera_common_vin_setup_io
[ 5.292000] ov5640_set_params........parma code:8200 support code:8200...........
[ 5.300000] ov5640_select_win......width:800 height:600......
[ 5.312000] ov5640_set_params: ov5640_write_array win regs
[ 5.320000] ov5640_set_mbusformat.............1384...........
[ 5.452000] ov5640_s_power.............1944...........
[ 5.456000] nxp_hdmi_link_setup: connected to me!!!
[ 10.564000] warning: `main' uses 32-bit capabilities (legacy support in use)
[ 18.428000] healthd: battery none chg=
[ 18.868000] lowmemorykiller: lowmem_shrink: convert oom_adj to oom_score_adj:
[ 18.872000] lowmemorykiller: oom_adj 0 => oom_score_adj 0
[ 18.880000] lowmemorykiller: oom_adj 1 => oom_score_adj 58
[ 18.884000] lowmemorykiller: oom_adj 2 => oom_score_adj 117
[ 18.892000] lowmemorykiller: oom_adj 3 => oom_score_adj 176
[ 18.896000] lowmemorykiller: oom_adj 9 => oom_score_adj 529
[ 18.896000] nxp_mlc_set_crop: pad(0), crop(0,0,1920,1080)
[ 18.896000] nxp_mlc_s_stream: enable 1, client VIDEO MLC RGB1, is_video 0
[ 18.896000] _hw_configure_rgb 1: code(0x86530000), w(1920), h(1080), pixelbyte(4)
[ 18.896000] _hw_configure_rgb 1 crop(0:0:1920:1080)
[ 18.896000] _hw_rgb_enable: module 1, enable 1
[ 18.896000] Fail, SYNCGEN1 not set sync ...
[ 18.896000] nxp_hdmi_s_stream: enable 1
[ 18.896000] hdmi_run entered
[ 18.908000] HDMI PHY Ready!!!
[ 18.908000] _set_hdmi_mux: entered: me e29bd000, remote e29bc40c
[ 18.908000] source device : SYNCGEN1
[ 18.908000] _set_hdmi_mux: exit
[ 18.908000] Display.1 fps=80 (12 ms), wait= 5 jiffies, Pixelclk=200000000hz
[ 18.908000] _calc_hdmi_sync_param: _h_sync_offset 0
[ 18.932000] hdmi_run exit
[ 18.972000] lowmemorykiller: oom_adj 15 => oom_score_adj 1000
[ 19.736000] acc_open
[ 19.736000] acc_release
[ 19.908000] HDMI HPD State 0x1
[ 99.912000] SysRq : Emergency Remount R/O
[ 99.920000] EXT4-fs (mmcblk0p3): re-mounted. Opts: (null)
[ 99.956000] EXT4-fs (mmcblk0p7): re-mounted. Opts: (null)
[ 99.972000] Emergency Remount complete
[ 100.024000] Disabling non-boot CPUs ...
[ 100.044000] Power down.
[ 100.052000] [axp] send power-off command!
[ 100.104000] cpu.1 shutdown ...
[ 100.104000] cpu.2 shutdown