from where did you "git clone"?
for the other NanoPi's are here the instructions:
http://wiki.friendlyarm.com/wiki/index. ... ld_OpenWrt
or download compiled OpenWRT (SD or eflasher) from here:
https://drive.google.com/drive/folders/ ... GkfijH0frC
Moderators: chensy, FATechsupport
Doroteo wrote:
Hello guidol,
Thanks a lot for your advices, I explain better my need, I want use the Nanopi R1 for a project with Openwrt, so I need build with my files and packages.
I have some experience on Openwrt development projects.
I tried
openwrt-18.06.1_sunxi-cortexa7_prebuilt_20190109.tar.gz
https://drive.google.com/open?id=1PHtHL ... 2Ss8ezgXDf
And following the directions in:
http://wiki.friendlyarm.com/wiki/index. ... ld_OpenWrt
But in all the cases cant find the target device Nanopi R1 or H3 architecture for build from sources Openwrt.
Only can build for nanopi-neo and nanopi-m1-plus, here the files generated:
openwrt-18.06.1-sunxi-cortexa7-sun8i-h3-nanopi-neo-squashfs-sdcard.img.gz
openwrt-18.06.1-sunxi-cortexa7-device-sun8i-h3-nanopi-m1-plus.manifest
openwrt-sdk-18.06.1-sunxi-cortexa7_gcc-7.3.0_musl_eabi.Linux-x86_64.tar.xz
openwrt-18.06.1-sunxi-cortexa7-sun8i-h3-nanopi-m1-plus-ext4-sdcard.img.gz
openwrt-18.06.1-sunxi-cortexa7-sun8i-h3-nanopi-m1-plus-squashfs-sdcard.img.gz
openwrt-18.06.1-sunxi-cortexa7-sun8i-h3-nanopi-neo-ext4-sdcard.img.gz
I apreciate any help.
Regards