Just a bump since this forum/topic is unfortunately very quiet. I did even sent an email asking about MIPi-CSi camera that can be used for NanoPC boards and no reply. It is quite unsettling.
I did some research on my own in the meantime, with meagre result so far.
There are two MIPI-CSI cameras that I found on that big Chinese site ali...
One camera with OV5645 26pins working under Android 5.1 only and compatible with Samsung 6818 based board.
Another camera with OV5645 24pins (no confirmed compatibility with boards and any OS, just that is MIPI).
Does anybody knows is is possible to adjust any of them from 26pins/24pins to 30pins and by whom/where?
I will try to attach spec sheet from 24pins one that was provided (unfortunately the specs sheet for more promising 26pins is not provided by seller).
Will also ask in another topic, but one potential issue (at least for my prototype) may be that two cameras may not be useable at the same time. Could anyone shade some light?