The wiki says to compile a new kernel and only lists 3.4.y but it's running on 4.4.49-s5p6818 from
s5p6818-friendly-core-xenial-4.4-arm64-20180209.img
The screen resolution needed is 800x480 and I originally booted with a LCD that failed.
From Xorg.o.log:-
9.856] Kernel command line: console=ttySAC0,115200n8 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait init=/sbin/init loglevel=7 printk.time=1 consoleblank=0 lcd=HDMI720P60 bootdev=2
[ 13.698] (II) modeset(0): Printing probed modes for output HDMI-1
[ 13.698] (II) modeset(0): Modeline "1280x720"x60.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz eP)
[ 13.698] (II) modeset(0): Output LVDS-1 disconnected
[ 13.698] (II) modeset(0): Output HDMI-1 connected
[ 13.699] (II) modeset(0): Using exact sizes for initial modes
[ 13.699] (II) modeset(0): Output HDMI-1 using initial mode 1280x720 +0+0
Does this mean I have to reinstall in order to have 800x480 resolution?
s5p6818-friendly-core-xenial-4.4-arm64-20180209.img
The screen resolution needed is 800x480 and I originally booted with a LCD that failed.
From Xorg.o.log:-
9.856] Kernel command line: console=ttySAC0,115200n8 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait init=/sbin/init loglevel=7 printk.time=1 consoleblank=0 lcd=HDMI720P60 bootdev=2
[ 13.698] (II) modeset(0): Printing probed modes for output HDMI-1
[ 13.698] (II) modeset(0): Modeline "1280x720"x60.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz eP)
[ 13.698] (II) modeset(0): Output LVDS-1 disconnected
[ 13.698] (II) modeset(0): Output HDMI-1 connected
[ 13.699] (II) modeset(0): Using exact sizes for initial modes
[ 13.699] (II) modeset(0): Output HDMI-1 using initial mode 1280x720 +0+0
Does this mean I have to reinstall in order to have 800x480 resolution?