So, after installing the Friendlycore image (s5p6818-sd-friendlycore-xenial-4.4-arm64-20190718.img) the attached USB keyboard is not detected..
[list=]
[*]The keyboard works fine on a Mac, so it's definitely functional. I even tried more than one of them.
[*]There is a USB mouse plugged into the keyboard (it's an Apple keyboard with an integrated hub) and the mouse is detected and works just fine
[/list]
If (after boot) I look in /dev/input I see:
.. so only mouse-based input sources and the 'gpio_keys' "keyboard". No trace of the USB one.
Is this an overlay thing ? Do I need to tell it to use the USB keyboard somehow ?
Attaching the boot log ... and the X server log
[list=]
[*]The keyboard works fine on a Mac, so it's definitely functional. I even tried more than one of them.
[*]There is a USB mouse plugged into the keyboard (it's an Apple keyboard with an integrated hub) and the mouse is detected and works just fine
[/list]
If (after boot) I look in /dev/input I see:
Code: Select all
lrwxrwxrwx 1 root root 9 Oct 8 17:23 platform-c0030000.ehci-usb-0:1.3:1.0-event-mouse -> ../event2
lrwxrwxrwx 1 root root 9 Oct 8 17:23 platform-c0030000.ehci-usb-0:1.3:1.0-mouse -> ../mouse1
lrwxrwxrwx 1 root root 9 Oct 8 17:23 platform-gpio_keys-event -> ../event1
.. so only mouse-based input sources and the 'gpio_keys' "keyboard". No trace of the USB one.
Is this an overlay thing ? Do I need to tell it to use the USB keyboard somehow ?
Attaching the boot log ... and the X server log