Mon Apr 03, 2017 11:02 pm
Hello everybody,
I'm working on the NanoPi M3, on Android, and I have a 10.1" screen with a resolution of 1280x800.
I've try to modify the lcds.c file (linux-3.4.y/arch/arm/plat-s5p6818/nanopi3/lcds.c) to put my resolution in the array "nanopi3_hdmi_config".
And I've try to set the bootargs to put HD101, who has a resolution of 1280x800.
In both cases the result is the same, the display is crop (I have black area on both sides) as you can see in attachments.
Any advice would be appreciated.
I'm working on the NanoPi M3, on Android, and I have a 10.1" screen with a resolution of 1280x800.
I've try to modify the lcds.c file (linux-3.4.y/arch/arm/plat-s5p6818/nanopi3/lcds.c) to put my resolution in the array "nanopi3_hdmi_config".
And I've try to set the bootargs to put HD101, who has a resolution of 1280x800.
In both cases the result is the same, the display is crop (I have black area on both sides) as you can see in attachments.
Any advice would be appreciated.