Problem connecting M1 plus to internet via ethernet
Posted: Mon Jun 19, 2017 2:49 am
Hi,
I'm having trouble connecting my nanoPi M1 plus to the internet via ethernet cable.
I'm running debian with the image
nanopi-m1_debian-jessie_3.4.39_20170531.img
from
https://www.mediafire.com/folder/3q2911 ... 3df73c6dk6
Output of ifconfig etc below;
It's my first time setting up a pi-like device so assume I've made mistakes
I'm having trouble connecting my nanoPi M1 plus to the internet via ethernet cable.
I'm running debian with the image
nanopi-m1_debian-jessie_3.4.39_20170531.img
from
https://www.mediafire.com/folder/3q2911 ... 3df73c6dk6
Output of ifconfig etc below;
Code: Select all
fa@FriendlyELEC:~$ sudo ifconfig
[sudo] password for fa:
eth0 Link encap:Ethernet HWaddr 4e:90:ff:e1:1d:e4
inet6 addr: fe80::4c90:ffff:fee1:1de4/64 Scope:Link
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:4 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:580 (580.0 B)
Interrupt:114
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:1 errors:0 dropped:0 overruns:0 frame:0
TX packets:1 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:112 (112.0 B) TX bytes:112 (112.0 B)
fa@FriendlyELEC:~$ cat /etc/network/interfaces
# interfaces(5) file used by ifup(8) and ifdown(8)
# Include files from /etc/network/interfaces.d:
source-directory /etc/network/interfaces.d
allow-hotplug eth0
iface eth0 inet dhcp
allow-hotplug wlan0
iface wlan0 inet dhcp
wpa-conf /etc/wpa_supplicant/wpa_supplicant.conf
It's my first time setting up a pi-like device so assume I've made mistakes