NanoPi NEO Plus2 flash to emmc

[q-bert]

I downloaded "nanopi-neo-plus2_eflasher_4.x.y_YYYYMMDD.img.zip" for my neo plus 2 and was able to flash it to emmc. This Ubuntu image works pretty well, however I prefer Debian.
Is it possible to flash debian (nanopi-neo-plus2_debian-nas-jessie_4.x.y_YYYYMMDD.img.zip) to emmc? If yes, how?

[SpoonMan]

Where did you find this ubuntu image?

[q-bert]

Friendlyarm Wiki:

http://wiki.friendlyarm.com/wiki/index. ... _NEO_Plus2

then follow the link in the "Get Image Files" section:

https://www.mediafire.com/folder/vknb4g ... -NEO-Plus2


I downloaded and flashed "nanopi-neo-plus2_eflasher_4.11.2_20170630.img.zip" to emmc

[Singleup]

Does anyone who can help to recompile Debian Eflasher version ? Really hope there will have this version. Thx.

[auto3000]

Third solution. I don't use neither Ubuntu/Debian/Armbian but Yocto for eMMC. You can probably adapt this repository below to your needs but this is worth the effort if you need something custom.
https://github.com/auto3000/meta-nanopi-neo-air

[igorp]

Third solution. I don't use neither Ubuntu/Debian/Armbian but Yocto for eMMC. You can probably adapt this repository below to your needs but this is worth the effort if you need something custom.
https://github.com/auto3000/meta-nanopi-neo-air

He wanted to put Ubuntu/Debian on different hardware. There is no Yocto for it.

[auto3000]

Hello igorp,

This Yocto repository is based on friendlyarm Linux/u-boot code repository and I can see Neo Plus 2 is supported. One can adapt this Yocto repository "machine.conf" to configure Linux and u-boot with proper dts/defconfig:
https://github.com/friendlyarm/linux/bl ... -plus2.dts
https://github.com/friendlyarm/u-boot/b ... _defconfig

Sorry this post is now completely off-topic.