Page 1 of 1
Casing or Housing for M4 with heatsink
Posted: Fri Sep 28, 2018 4:03 pm
by skyknight
Hi,
Do you have casing or housing for M4 with heatsink?
Or are there compatible case for M4 with heatsink?
Thank you
KR
Re: Casing or Housing for M4 with heatsink
Posted: Thu Oct 04, 2018 7:58 pm
by sjiampojamarn
I have the same with acrylic case preference. Any pointer?
Re: Casing or Housing for M4 with heatsink
Posted: Tue Feb 05, 2019 4:09 pm
by miguelor
Hi there
I found and printed this one:
https://www.thingiverse.com/thing:3313324Nice and fitted perfectly
Re: Casing or Housing for M4 with heatsink
Posted: Sun May 26, 2019 9:31 pm
by jtreg
I found the top really flimsy but does the job ok...
Re: Casing or Housing for M4 with heatsink
Posted: Sun Jun 16, 2019 12:15 am
by RedStonesparrow
I'm using the official RPI case. i used an exacto knife to cut out the bottom, soft plastic made it easy. the usbc hole needed to be enlarged a bit but no big deal. Remembet to cut off the fin between the usb ports to leave room for the uart. I chose this mainly for the fact that the top and side plates are easily removable and could be swapped for custom 3d parts eventually.
