Page 1 of 1

NanoPC-T4 support for "XPG SX6000 Lite" NVMe

Posted: Tue Jun 25, 2019 1:08 pm
by ramgopalkota
All

I am trying to use "XPG SX6000 Lite" M.2 NVMe SSD. I dont see any output in lspci or any device /dev/ ..
Kernel Version is Linux 4.4.154 #3 SMP Fri Oct 12 07:51:30 EST 2018 aarch64 GNU/Linux

Is there anything needs to be done ? or pointers where to look ? Please help...

Re: NanoPC-T4 support for "XPG SX6000 Lite" NVMe

Posted: Wed Jun 26, 2019 6:54 am
by ramgopalkota
Is XPG SX6000 Lite supported or only samsung 970 EVO is the only supported ?
Datasheet of the NVMe Module: http://www.xpg.com/us/feature/597

Re: NanoPC-T4 support for "XPG SX6000 Lite" NVMe

Posted: Thu Jun 27, 2019 2:10 am
by ramgopalkota
Hi
I am seeing voltage failures in the kernel log .. Is there a new DTB file which has these fixes. Please help..
root@DietPi:~# journalctl | grep -i pci
PCI I/O : 0xffffffbffee00000 - 0xffffffbfffe00000 ( 16 MB)
Jun 26 19:43:28 DietPi kernel: PCI/MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
Jun 26 19:43:28 DietPi kernel: PCI: CLS 0 bytes, default 64
Jun 26 19:43:28 DietPi kernel: phy phy-pcie-phy.5: Looking up phy-supply from device tree
Jun 26 19:43:28 DietPi kernel: phy phy-pcie-phy.5: Looking up phy-supply property in node /pcie-phy failed
Jun 26 19:43:28 DietPi kernel: rockchip-pcie f8000000.pcie: GPIO lookup for consumer ep
Jun 26 19:43:28 DietPi kernel: rockchip-pcie f8000000.pcie: using device tree for GPIO lookup
Jun 26 19:43:28 DietPi kernel: of_get_named_gpiod_flags: parsed 'ep-gpios' property of node '/pcie@f8000000[0]' - status (0)
Jun 26 19:43:28 DietPi kernel: rockchip-pcie f8000000.pcie: Looking up vpcie3v3-supply from device tree
Jun 26 19:43:28 DietPi kernel: rockchip-pcie f8000000.pcie: Looking up vpcie3v3-supply property in node /pcie@f8000000 failed
Jun 26 19:43:28 DietPi kernel: rockchip-pcie f8000000.pcie: no vpcie3v3 regulator found
Jun 26 19:43:28 DietPi kernel: rockchip-pcie f8000000.pcie: Looking up vpcie1v8-supply from device tree
Jun 26 19:43:28 DietPi kernel: rockchip-pcie f8000000.pcie: Looking up vpcie1v8-supply property in node /pcie@f8000000 failed
Jun 26 19:43:28 DietPi kernel: rockchip-pcie f8000000.pcie: no vpcie1v8 regulator found
Jun 26 19:43:28 DietPi kernel: rockchip-pcie f8000000.pcie: Looking up vpcie0v9-supply from device tree
Jun 26 19:43:28 DietPi kernel: rockchip-pcie f8000000.pcie: Looking up vpcie0v9-supply property in node /pcie@f8000000 failed
Jun 26 19:43:28 DietPi kernel: rockchip-pcie f8000000.pcie: no vpcie0v9 regulator found
Jun 26 19:43:28 DietPi kernel: rockchip-pcie f8000000.pcie: PCIe link training gen1 timeout!
Jun 26 19:43:28 DietPi kernel: rockchip-pcie: probe of f8000000.pcie failed with error -110
Jun 26 19:43:28 DietPi kernel: ehci-pci: EHCI PCI platform driver

Re: NanoPC-T4 support for "XPG SX6000 Lite" NVMe

Posted: Thu Jul 11, 2019 5:25 pm
by Tinderbox (UK)
On my NanoPC-T4

i am using an "addlink S70 512GB NVMe" Spec 3000R/2000W though i only get Approx 500R/450W in Android v8.1 Orio.

Not sure if this is any help as it`s not Linux.

John.

Re: NanoPC-T4 support for "XPG SX6000 Lite" NVMe

Posted: Sun Aug 25, 2019 12:06 pm
by amekassa86
Tinderbox (UK) wrote:
On my NanoPC-T4

i am using an "addlink S70 512GB NVMe" Spec 3000R/2000W though i only get Approx 500R/450W in Android v8.1 Orio.

Not sure if this is any help as it`s not Linux.auto clicker word unscrambler jumble solver

John.

Kernel Version is Linux 4.4.154 #3 SMP Fri Oct 12 07:51:30 EST 2018 aarch64 GNU/Linux