Hi,
I get a new NanoPi 4Mv2. It was mounted on the heatsink and boot from eMMC.
Unfortunately he boots very reluctantly from the eMMC card. If the Pi is cold, there is no change that it boots. It simply hangs itself during the boot process. Since the Pi is a bit warmer the boot process works sometimes. Only after the computer has reached a temperature of approx. 35°C it runs reasonably stable from the eMMC. The problem does not exist when booting from an SD card.
Additionally the devices (keyboard, mouse, SSD) are sometimes not recognized with 2 USB3 ports.
I use an original power supply for the Raspberry 4.
Is there a hardware problem?
I get a new NanoPi 4Mv2. It was mounted on the heatsink and boot from eMMC.
Unfortunately he boots very reluctantly from the eMMC card. If the Pi is cold, there is no change that it boots. It simply hangs itself during the boot process. Since the Pi is a bit warmer the boot process works sometimes. Only after the computer has reached a temperature of approx. 35°C it runs reasonably stable from the eMMC. The problem does not exist when booting from an SD card.
Additionally the devices (keyboard, mouse, SSD) are sometimes not recognized with 2 USB3 ports.
I use an original power supply for the Raspberry 4.
Is there a hardware problem?