Which M.2 SSD are known to be working in NanoPC-t4 ?

[pleni]

Dear all ,

I would suggest everyone to share his experience with M.2 SSD recognizable by NanoPC-T4 .
From internet I found that these models should work:
LITEON T10 120GB SSD
Samsung MZ-V7E2T0BW SSD 970 EVO

From my personal experience: "shorty" Toshiba KBG30ZMS256GA is not recognized by T4.

We are going to buy the most affordable SSD for that board and I want to avoid mistakes.
Believe that this info could be useful for all .

Thanks !
Dmitry

[balbes-150]

Dear all ,

I would suggest everyone to share his experience with M.2 SSD recognizable by NanoPC-T4 .
From internet I found that these models should work:
LITEON T10 120GB SSD
Samsung MZ-V7E2T0BW SSD 970 EVO

From my personal experience: "shorty" Toshiba KBG30ZMS256GA is not recognized by T4.

We are going to buy the most affordable SSD for that board and I want to avoid mistakes.
Believe that this info could be useful for all .

Thanks !
Dmitry

Work on my NanoPC T4

KingSpec M.2 SSD 120GB
ORICO SSD 128 ГБ

[Tinderbox (UK)]

The ssd below works on my T4

"addlink S70 512GB SSD NVMe PCIe Gen3x4 M.2 2280 Solid State Drive with Read 3400 MB/s Write 2000 MB/s "

[v8dave]

I bought this one and it was detected and I can save to it and read from it. I can't figure out yet how to boot from it but as storage, but it was detected with FriendlyArm Desktop.

NVME M.2 128GB MIDASFORCE LIGHTNING MAX SSD NVMe M.2 PCIe Gen3 x4

[calvarez]

Does anyone knows if WD NVMe disks work with T4?

How do you check if they are recognized under linux?

Best,

Tino