Code: Select all
Armbian 20.02.4 Buster ttyGS0
nanopi-r2s login: root
Password:
Last login: Thu Apr 9 06:09:43 UTC 2020 from 10.0.10.50 on pts/1
_ _ _ ____ ____ ____
| \ | | __ _ _ __ ___ _ __ (_) | _ \|___ \/ ___|
| \| |/ _` | '_ \ / _ \| '_ \| | | |_) | __) \___ \
| |\ | (_| | | | | (_) | |_) | | | _ < / __/ ___) |
|_| \_|\__,_|_| |_|\___/| .__/|_| |_| \_\_____|____/
|_|
Welcome to Armbian buster with Linux 5.4.28-rockchip64
No end-user support: work in progress
System load: 2.41 0.64 0.22 Up time: 1 min
Memory usage: 27 % of 471MB IP: 10.0.30.132 169.254.10.105 10.0.20.215
CPU temp: 70°C
Usage of /: 4% of 58G
[ General system configuration (beta): armbian-config ]
- login console is enabled also on mUSB connector
- known problem: reboot sometimes doesn’t bring the device back.
- network devices are not managed by Network manager. Configure via /etc/network/interfaces
- comes in Bionic, Buster, Bullseye and Stretch
- can be build from sources https://github.com/armbian/build
- supported: Docker, Wireguard, ...
- Iperf3 on lan: 937 - 910Mbits/s and wan: 879 - 831Mbits/s
- getting started
https://www.armbian.com/nanopi-r2s/