Exactly the same thing with the same output has happened to me while flashing any eflash SD-to-EMMC friendlywrt images to my R2S Plus.
I've tried to EraseAll emmc entirely using RKDevTool_v3.19_for_window accordingly to debricking instructions, but after that my R2S can't enter MASKROM mode after pressint the hardware MASK button.
2) what should I do to make R2S Plus entering MASKROM mode via hardware button again?
Below are the logs of rk3328-eflasher-friendlywrt-22.03-20230524.img been flashed from 8GB sandisk SD card to eMMC:
Code: Select all
DDR version 1.16 20190528
ID:0x805 N
In
DDR4
333MHz
Bus Width=32 Col=10 Bank=4 Bank Group=2 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
ddrconfig:14
OUT
Boot1 Release Time: May 13 2019 17:34:36, version: 2.50
ChipType = 0x11, 248
mmc2:cmd19,100
SdmmcInit=2 0
BootCapSize=2000
UserCapSize=29600MB
FwPartOffset=2000 , 2000
SdmmcInit=0 NOT PRESENT
StorageInit ok = 10345
Raw SecureMode = 0
SecureInit read PBA: 0x4
SecureInit read PBA: 0x404
SecureInit read PBA: 0x804
SecureInit read PBA: 0xc04
SecureInit read PBA: 0x1004
SecureInit ret = 0, SecureMode = 0
atags_set_bootdev: ret:(0)
GPT part: 0, name: uboot, start:0x4000, size:0x2000
GPT part: 1, name: trust, start:0x6000, size:0x2000
GPT part: 2, name: misc, start:0x8000, size:0x2000
GPT part: 3, name: dtbo, start:0xa000, size:0x2000
GPT part: 4, name: resource, start:0xc000, size:0x8000
GPT part: 5, name: kernel, start:0x14000, size:0x14000
GPT part: 6, name: boot, start:0x28000, size:0x18000
GPT part: 7, name: rootfs, start:0x40000, size:0x120000
GPT part: 8, name: userdata, start:0x160000, size:0x386ffdf
find part:uboot OK. first_lba:0x4000.
find part:trust OK. first_lba:0x6000.
LoadTrust Addr:0x6000
No find bl30.bin
Load uboot, ReadLba = 4000
Load OK, addr=0x200000, size=0xeabf0
RunBL31 0x40000
NOTICE: BL31: v1.3(release):734d842
NOTICE: BL31: Built : 15:29:53, Dec 26 2019
NOTICE: BL31:Rockchip release version: v1.3
INFO: ARM GICv2 driver initialized
INFO: Using opteed sec cpu_context!
INFO: boot cpu mask: 1
INFO: plat_rockchip_pmu_init: pd status 0xe
INFO: BL31: Initializing runtime services
INFO: BL31: Initializing BL32
INF [0x0] TEE-CORE:init_primary_helper:337: Initializing (1.1.0-235-g3b0152ca #231 Fri Mar 13 02:01:39 UTC 2020 aarch64)
INF [0x0] TEE-CORE:init_primary_helper:338: Release version: 1.4
INF [0x0] TEE-CORE:init_teecore:83: teecore inits done
INFO: BL31: Preparing for EL3 exit to normal world
INFO: Entry point address = 0x200000
INFO: SPSR = 0x3c9
U-Boot 2017.09-g715e1112ec-dirty # (Oct 16 2024 - 11:12:28 +0800)
Board: FriendlyELEC RK3328 board
PreSerial: 2
DRAM: 992 MiB
Sysmem: init
Relocation Offset: 3dbd8000, fdt: 3bdcd838
Using default environment
mmc@ff500000: 1, mmc@ff520000: 0
Bootdev(atags): mmc 0
MMC0: High Speed, 52Mhz
PartType: EFI
boot mode: None
Found DTB in resource part
Failed to load DTB
Failed to get kernel dtb, ret=-19
rockchip_set_serialno: could not find efuse device
CLK: (sync kernel. arm: enter 600000 KHz, init 600000 KHz, kernel 0N/A)
apll 400000 KHz
dpll 664000 KHz
cpll 1200000 KHz
gpll 491009 KHz
npll 600000 KHz
armclk 600000 KHz
aclk_bus 150000 KHz
hclk_bus 75000 KHz
pclk_bus 75000 KHz
aclk_peri 150000 KHz
hclk_peri 75000 KHz
pclk_peri 75000 KHz
Net: No ethernet found.
Hit key to stop autoboot('CTRL+C'): 0
## Booting Rockchip Format Image
Failed to load DTB
Failed to read fdt, ret=-19
Card did not respond to voltage select!
mmc_init: -95, time 9
switch to partitions #0, OK
mmc0(part 0) is current device
Failed to mount ext2 filesystem...
** Unrecognized filesystem type **
starting USB...
Bus usb@ff5c0000: Port not available.
Bus usb@ff580000: scanning bus usb@ff580000 for devices... 1 USB Device(s) found
scanning usb for storage devices... 0 Storage Device(s) found
Device 0: unknown device
No ethernet found.
missing environment variable: pxeuuid
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/00000000
No ethernet found.
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/0000000
No ethernet found.
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/000000
No ethernet found.
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/00000
No ethernet found.
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/0000
No ethernet found.
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/000
No ethernet found.
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/00
No ethernet found.
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/0
No ethernet found.
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/default-arm-rockchip
No ethernet found.
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/default-arm
No ethernet found.
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/default
No ethernet found.
Config file not found
No ethernet found.
No ethernet found.
nanopi-r2# Failed to load DTB
DDR version 1.16 20190528
ID:0x805 N
In
DDR4
333MHz
Bus Width=32 Col=10 Bank=4 Bank Group=2 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
ddrconfig:14
OUT
Boot1 Release Time: May 13 2019 17:34:36, version: 2.50
ChipType = 0x11, 248
mmc2:cmd19,100
SdmmcInit=2 0
BootCapSize=2000
UserCapSize=29600MB
FwPartOffset=2000 , 2000
mmc0:cmd5,20
SdmmcInit=0 0
BootCapSize=0
UserCapSize=7580MB
FwPartOffset=2000 , 0
run on sd0
StorageInit ok = 192858
Raw SecureMode = 0
SecureInit read PBA: 0x4
SecureInit read PBA: 0x404
SecureInit read PBA: 0x804
SecureInit read PBA: 0xc04
SecureInit read PBA: 0x1004
SecureInit ret = 0, SecureMode = 0
atags_set_bootdev: ret:(0)
GPT 0x337a9f0 signature is wrong
recovery gpt...
GPT 0x337a9f0 signature is wrong
recovery gpt fail!
LoadTrust Addr:0x4000
No find bl30.bin
Load uboot, ReadLba = 2000
Load OK, addr=0x200000, size=0xa4804
RunBL31 0x40000
NOTICE: BL31: v1.3(release):734d842
NOTICE: BL31: Built : 15:29:53, Dec 26 2019
NOTICE: BL31:Rockchip release version: v1.3
INFO: ARM GICv2 driver initialized
INFO: Using opteed sec cpu_context!
INFO: boot cpu mask: 1
INFO: plat_rockchip_pmu_init: pd status 0xe
INFO: BL31: Initializing runtime services
INFO: BL31: Initializing BL32
INF [0x0] TEE-CORE:init_primary_helper:337: Initializing (1.1.0-235-g3b0152ca #231 Fri Mar 13 02:01:39 UTC 2020 aarch64)
INF [0x0] TEE-CORE:init_primary_helper:338: Release version: 1.4
INF [0x0] TEE-CORE:init_teecore:83: teecore inits done
INFO: BL31: Preparing for EL3 exit to normal world
INFO: Entry point address = 0x200000
INFO: SPSR = 0x3c9
U-Boot 2014.10-RK3328-06-03272-gc5b5cef39a (Apr 18 2020 - 14:49:13)
CPU: rk3328
cpu version = 1
CPU's clock information:
arm pll = 600000000HZ
general pll = 1200000000HZ
ddr pll = 664000000HZ
codec pll = 1200000000HZ
new pll = 594000000HZ
Board: Rockchip platform Board
Uboot as second level loader
DRAM: Found dram banks: 1
Adding bank:0000000000200000(000000003fe00000)
Reserve memory for trust os.
dram reserve bank: base = 0x08400000, size = 0x01e00000
128 MiB
GIC CPU mask = 0x00000001
SdmmcInit = 0 0
SDCard Boot.
storage init OK!
Using default environment
Writing env to storage...
done
GetParam
Load FDT from resource image.
can't find dts node for fixed
rk816_set_regulator_init vdd_logic init uV:1075000
rk816_set_regulator_init vdd_arm init uV:1225000
pmic:rk805
can't find dts node for pwm0
CPU's clock information:
arm pll = 1200000000HZ
general pll = 1200000000HZ
ddr pll = 664000000HZ
codec pll = 1200000000HZ
new pll = 594000000HZ
Can't find dts node for fuel guage cw201x
can't find dts node for ec-battery
Can't find dts node for charger bq25700
invalide header tag
ca head not found
SecureBootEn = 0, SecureBootLock = 0
#Boot ver: 2020-08-31#1.09
empty serial no.
normal boot.
vbus = 1
no fuel gauge found
no fuel gauge found
Rockchip UBOOT DRM driver version: develop-v1.0.0
Can't find display display route node
read logo on state from dts [0]
no fuel gauge found
Hit any key to stop autoboot: 0
load fdt from resouce.
Secure Boot state: 0
kernel @ 0x00280000 (0x01b63a00)
ramdisk @ 0x04bf0000 (0x007b2bc0)
bootrk: do_bootm_linux...
Loading Device Tree to 0000000004600000, end 0000000004612d41 ... OK
Add bank:0000000000200000, 0000000008200000
Add bank:000000000a200000, 0000000035e00000
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[ 0.000000] Linux version 5.15.78 (fa@jensen) (aarch64-linux-gcc (ctng-1.25.0-119g-FA) 11.3.0, GNU ld (GNU Binutils) 2.38) #808 SMP PREEMPT Tue Apr 4 15:48:58 CST 2023
[ 0.000000] Machine model: FriendlyElec NanoPi R2S Plus
[ 0.000000] efi: UEFI not found.
[ 0.000000] [Firmware Bug]: Kernel image misaligned at boot, please fix your bootloader!
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000200000-0x000000003fffffff]
[ 0.000000] DMA32 empty
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000200000-0x00000000083fffff]
[ 0.000000] node 0: [mem 0x000000000a200000-0x000000003fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x000000003fffffff]
[ 0.000000] On node 0, zone DMA: 512 pages in unavailable ranges
[ 0.000000] On node 0, zone DMA: 7680 pages in unavailable ranges
[ 0.000000] cma: Reserved 16 MiB at 0x000000003dc00000
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.0 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: Trusted OS migration not required
[ 0.000000] psci: SMC Calling Convention v1.0
[ 0.000000] percpu: Embedded 28 pages/cpu s75688 r8192 d30808 u114688
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: detected: ARM erratum 845719
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 249864
[ 0.000000] Kernel command line: swiotlb=1 coherent_pool=1m root=/dev/mmcblk0p2 rw rootfstype=ext4 cgroup_enable=cpuset cgroup_memory=1 cgroup_enable=memory swapaccount=1 storagemedia=sd androidboot.oem_unlocked=0 loader.timestamp=2020-04-18_14:49:13 hdmi.vic=-1 tve.format=-1 SecureBootCheckOk=0
[ 0.000000] Unknown kernel command line parameters "cgroup_enable=memory cgroup_memory=1 storagemedia=sd SecureBootCheckOk=0", will be passed to user space.
[ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 941944K/1015808K available (14592K kernel code, 2766K rwdata, 4732K rodata, 5824K init, 792K bss, 57480K reserved, 16384K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] ftrace: allocating 46745 entries in 183 pages
[ 0.000000] ftrace: allocated 183 pages with 6 groups
[ 0.000000] trace event string verifier disabled
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] rcu: RCU event tracing is enabled.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[ 0.000000] Trampoline variant of Tasks RCU enabled.
[ 0.000000] Rude variant of Tasks RCU enabled.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] Root IRQ handler: gic_handle_irq
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[ 0.000001] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[ 0.001018] Console: colour dummy device 80x25
[ 0.001900] printk: console [tty0] enabled
[ 0.001985] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
[ 0.002041] pid_max: default: 32768 minimum: 301
[ 0.002250] LSM: Security Framework initializing
[ 0.002468] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
[ 0.002519] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
[ 0.006906] rcu: Hierarchical SRCU implementation.
[ 0.008776] EFI services will not be available.
[ 0.009982] smp: Bringing up secondary CPUs ...
[ 0.011356] Detected VIPT I-cache on CPU1
[ 0.011478] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[ 0.013016] Detected VIPT I-cache on CPU2
[ 0.013131] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[ 0.014655] Detected VIPT I-cache on CPU3
[ 0.014765] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[ 0.015014] smp: Brought up 1 node, 4 CPUs
[ 0.015156] SMP: Total of 4 processors activated.
[ 0.015181] CPU features: detected: 32-bit EL0 Support
[ 0.015205] CPU features: detected: CRC32 instructions
[ 0.039214] CPU: All CPU(s) started at EL2
[ 0.039356] alternatives: patching kernel code
[ 0.041494] devtmpfs: initialized
[ 0.062479] Registered cp15_barrier emulation handler
[ 0.062556] Registered setend emulation handler
[ 0.062976] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.063045] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.064469] pinctrl core: initialized pinctrl subsystem
[ 0.065846] DMI not present or invalid.
[ 0.067165] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.071073] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
[ 0.071817] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.072886] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.073114] audit: initializing netlink subsys (disabled)
[ 0.073608] audit: type=2000 audit(0.072:1): state=initialized audit_enabled=0 res=1
[ 0.075047] thermal_sys: Registered thermal governor 'fair_share'
[ 0.075063] thermal_sys: Registered thermal governor 'step_wise'
[ 0.075682] cpuidle: using governor ladder
[ 0.075777] cpuidle: using governor menu
[ 0.076221] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.076481] ASID allocator initialised with 65536 entries
[ 0.096593] platform ff3c0000.hdmi: Fixing up cyclic dependency with ff370000.vop
[ 0.126327] rockchip-gpio ff210000.gpio0: probed /pinctrl/gpio0@ff210000
[ 0.128075] rockchip-gpio ff220000.gpio1: probed /pinctrl/gpio1@ff220000
[ 0.129577] rockchip-gpio ff230000.gpio2: probed /pinctrl/gpio2@ff230000
[ 0.130989] rockchip-gpio ff240000.gpio3: probed /pinctrl/gpio3@ff240000
[ 0.164553] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.164621] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[ 0.164653] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.164684] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[ 0.168334] cryptd: max_cpu_qlen set to 1000
[ 0.193267] iommu: Default domain type: Translated
[ 0.193332] iommu: DMA domain TLB invalidation policy: strict mode
[ 0.195906] SCSI subsystem initialized
[ 0.196923] usbcore: registered new interface driver usbfs
[ 0.197047] usbcore: registered new interface driver hub
[ 0.197142] usbcore: registered new device driver usb
[ 0.197295] mc: Linux media interface: v0.10
[ 0.197362] videodev: Linux video capture interface: v2.00
[ 0.197478] pps_core: LinuxPPS API ver. 1 registered
[ 0.197502] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.197564] PTP clock support registered
[ 0.199122] Advanced Linux Sound Architecture Driver Initialized.
[ 0.200634] Bluetooth: Core ver 2.22
[ 0.200753] NET: Registered PF_BLUETOOTH protocol family
[ 0.200779] Bluetooth: HCI device and connection manager initialized
[ 0.200820] Bluetooth: HCI socket layer initialized
[ 0.200854] Bluetooth: L2CAP socket layer initialized
[ 0.200913] Bluetooth: SCO socket layer initialized
[ 0.200971] NetLabel: Initializing
[ 0.200990] NetLabel: domain hash size = 128
[ 0.201013] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.201154] NetLabel: unlabeled traffic allowed by default
[ 0.202644] clocksource: Switched to clocksource arch_sys_counter
[ 0.339331] VFS: Disk quotas dquot_6.6.0
[ 0.339497] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.339832] FS-Cache: Loaded
[ 0.357271] NET: Registered PF_INET protocol family
[ 0.357645] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.359802] tcp_listen_portaddr_hash hash table entries: 512 (order: 2, 20480 bytes, linear)
[ 0.359921] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.359975] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.360123] TCP bind hash table entries: 8192 (order: 6, 262144 bytes, linear)
[ 0.360471] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.360784] UDP hash table entries: 512 (order: 3, 49152 bytes, linear)
[ 0.360924] UDP-Lite hash table entries: 512 (order: 3, 49152 bytes, linear)
[ 0.361468] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.362919] RPC: Registered named UNIX socket transport module.
[ 0.362984] RPC: Registered udp transport module.
[ 0.363011] RPC: Registered tcp transport module.
[ 0.363035] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.363077] PCI: CLS 0 bytes, default 64
[ 0.363537] Trying to unpack rootfs image as initramfs...
[ 0.372376] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[ 1.106300] Freeing initrd memory: 7880K
[ 1.698328] Initialise system trusted keyrings
[ 1.698937] workingset: timestamp_bits=46 max_order=18 bucket_order=0
[ 1.714429] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 1.715347] FS-Cache: Netfs 'nfs' registered for caching
[ 1.716446] NFS: Registering the id_resolver key type
[ 1.716605] Key type id_resolver registered
[ 1.716629] Key type id_legacy registered
[ 1.716817] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 1.716864] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[ 1.717334] fuse: init (API version 7.34)
[ 1.790954] Key type asymmetric registered
[ 1.791028] Asymmetric key parser 'x509' registered
[ 1.791236] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 1.791601] io scheduler mq-deadline registered
[ 1.791638] io scheduler kyber registered
[ 1.801746] rockchip-u3phy ff470000.usb3-phy: Rockchip u3phy initialized successfully
[ 1.803502] gpio-syscon ff100000.syscon:gpio: can't read the data register offset!
[ 1.810760] dma-pl330 ff1f0000.dma-controller: Loaded driver for PL330 DMAC-241330
[ 1.810842] dma-pl330 ff1f0000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
[ 1.811943] Serial: 8250/16550 driver, 5 ports, IRQ sharing disabled
[ 1.815492] ff120000.serial: ttyS1 at MMIO 0xff120000 (irq = 19, base_baud = 1500000) is a 16550A
[ 1.817318] ff130000.serial: ttyS2 at MMIO 0xff130000 (irq = 20, base_baud = 1500000) is a 16550A
[ 1.906097] printk: console [ttyS2] enabled
[ 1.910482] random: crng init done
[ 1.911177] rockchip-vop ff370000.vop: Adding to iommu group 1
[ 1.932600] brd: module loaded
[ 1.951221] loop: module loaded
[ 1.957895] rk_gmac-dwmac ff540000.ethernet: IRQ eth_wake_irq not found
[ 1.958552] rk_gmac-dwmac ff540000.ethernet: IRQ eth_lpi not found
[ 1.959426] rk_gmac-dwmac ff540000.ethernet: PTP uses main clock
[ 1.960355] rk_gmac-dwmac ff540000.ethernet: clock input or output? (input).
[ 1.961017] rk_gmac-dwmac ff540000.ethernet: TX delay(0x24).
[ 1.961543] rk_gmac-dwmac ff540000.ethernet: RX delay(0x18).
[ 1.962080] rk_gmac-dwmac ff540000.ethernet: integrated PHY? (no).
[ 1.962813] rk_gmac-dwmac ff540000.ethernet: cannot get clock clk_mac_speed
[ 1.963450] rk_gmac-dwmac ff540000.ethernet: clock input from PHY
[ 1.969025] rk_gmac-dwmac ff540000.ethernet: init for RGMII
[ 1.970014] rk_gmac-dwmac ff540000.ethernet: User ID: 0x10, Synopsys ID: 0x35
[ 1.970735] rk_gmac-dwmac ff540000.ethernet: DWMAC1000
[ 1.971219] rk_gmac-dwmac ff540000.ethernet: DMA HW capability register supported
[ 1.971904] rk_gmac-dwmac ff540000.ethernet: RX Checksum Offload Engine supported
[ 1.972586] rk_gmac-dwmac ff540000.ethernet: COE Type 2
[ 1.973068] rk_gmac-dwmac ff540000.ethernet: TX Checksum insertion supported
[ 1.973709] rk_gmac-dwmac ff540000.ethernet: Wake-Up On Lan supported
[ 1.974422] rk_gmac-dwmac ff540000.ethernet: Normal descriptors
[ 1.974988] rk_gmac-dwmac ff540000.ethernet: Ring mode enabled
[ 1.975525] rk_gmac-dwmac ff540000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[ 2.035015] mdio_bus stmmac-0: MDIO device at address 1 is missing.
[ 2.038742] PPP generic driver version 2.4.2
[ 2.039645] usbcore: registered new interface driver asix
[ 2.040235] usbcore: registered new interface driver ax88179_178a
[ 2.040858] usbcore: registered new interface driver cdc_ether
[ 2.041458] usbcore: registered new interface driver qmi_wwan
[ 2.045233] phy phy-ff470000.usb3-phy.2: u3phy u2 power on
[ 2.045814] phy phy-ff470000.usb3-phy.3: u3phy u3 power on
[ 2.048925] dwc2 ff580000.usb: supply vusb_d not found, using dummy regulator
[ 2.049891] dwc2 ff580000.usb: supply vusb_a not found, using dummy regulator
[ 2.178763] dwc2 ff580000.usb: EPs: 10, dedicated fifos, 972 entries in SPRAM
[ 2.179943] dwc2 ff580000.usb: DWC OTG Controller
[ 2.180434] dwc2 ff580000.usb: new USB bus registered, assigned bus number 1
[ 2.181141] dwc2 ff580000.usb: irq 44, io mem 0xff580000
[ 2.181995] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15
[ 2.182821] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.183487] usb usb1: Product: DWC OTG Controller
[ 2.183927] usb usb1: Manufacturer: Linux 5.15.78 dwc2_hsotg
[ 2.184450] usb usb1: SerialNumber: ff580000.usb
[ 2.186005] hub 1-0:1.0: USB hub found
[ 2.186449] hub 1-0:1.0: 1 port detected
[ 2.188746] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.189395] ehci-pci: EHCI PCI platform driver
[ 2.189901] ehci-platform: EHCI generic platform driver
[ 2.193294] ehci-platform ff5c0000.usb: EHCI Host Controller
[ 2.193858] ehci-platform ff5c0000.usb: new USB bus registered, assigned bus number 2
[ 2.194894] ehci-platform ff5c0000.usb: irq 45, io mem 0xff5c0000
[ 2.210659] ehci-platform ff5c0000.usb: USB 2.0 started, EHCI 1.00
[ 2.211726] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15
[ 2.212495] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.213161] usb usb2: Product: EHCI Host Controller
[ 2.213613] usb usb2: Manufacturer: Linux 5.15.78 ehci_hcd
[ 2.214119] usb usb2: SerialNumber: ff5c0000.usb
[ 2.215687] hub 2-0:1.0: USB hub found
[ 2.216121] hub 2-0:1.0: 1 port detected
[ 2.217466] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.218082] ohci-platform: OHCI generic platform driver
[ 2.219405] ohci-platform ff5d0000.usb: Generic Platform OHCI controller
[ 2.220058] ohci-platform ff5d0000.usb: new USB bus registered, assigned bus number 3
[ 2.221053] ohci-platform ff5d0000.usb: irq 46, io mem 0xff5d0000
[ 2.283041] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.15
[ 2.283821] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.284490] usb usb3: Product: Generic Platform OHCI controller
[ 2.285034] usb usb3: Manufacturer: Linux 5.15.78 ohci_hcd
[ 2.285539] usb usb3: SerialNumber: ff5d0000.usb
[ 2.287151] hub 3-0:1.0: USB hub found
[ 2.287593] hub 3-0:1.0: 1 port detected
[ 2.290067] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 2.290694] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 4
[ 2.291682] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000202002030010
[ 2.292660] xhci-hcd xhci-hcd.0.auto: irq 53, io mem 0xff600000
[ 2.293793] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 2.294315] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 5
[ 2.295096] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
[ 2.296067] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15
[ 2.296836] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.297502] usb usb4: Product: xHCI Host Controller
[ 2.297955] usb usb4: Manufacturer: Linux 5.15.78 xhci-hcd
[ 2.298458] usb usb4: SerialNumber: xhci-hcd.0.auto
[ 2.300079] hub 4-0:1.0: USB hub found
[ 2.300514] hub 4-0:1.0: 1 port detected
[ 2.301735] usb usb5: We don't know the algorithms for LPM for this host, disabling LPM.
[ 2.302833] usb usb5: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.15
[ 2.303608] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.304271] usb usb5: Product: xHCI Host Controller
[ 2.304725] usb usb5: Manufacturer: Linux 5.15.78 xhci-hcd
[ 2.305232] usb usb5: SerialNumber: xhci-hcd.0.auto
[ 2.306805] hub 5-0:1.0: USB hub found
[ 2.307240] hub 5-0:1.0: 1 port detected
[ 2.308595] usbcore: registered new interface driver cdc_acm
[ 2.309127] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 2.309929] usbcore: registered new interface driver cdc_wdm
[ 2.310658] usbcore: registered new interface driver usb-storage
[ 2.311409] usbcore: registered new interface driver usbserial_generic
[ 2.312048] usbserial: USB Serial support registered for generic
[ 2.312673] usbcore: registered new interface driver ch341
[ 2.313209] usbserial: USB Serial support registered for ch341-uart
[ 2.313870] usbcore: registered new interface driver cp210x
[ 2.314417] usbserial: USB Serial support registered for cp210x
[ 2.315103] usbcore: registered new interface driver ftdi_sio
[ 2.315676] usbserial: USB Serial support registered for FTDI USB Serial Device
[ 2.316592] usbcore: registered new interface driver option
[ 2.317137] usbserial: USB Serial support registered for GSM modem (1-port)
[ 2.318111] usbcore: registered new interface driver pl2303
[ 2.318684] usbserial: USB Serial support registered for pl2303
[ 2.319329] usbcore: registered new interface driver qcserial
[ 2.319888] usbserial: USB Serial support registered for Qualcomm USB modem
[ 2.321441] mousedev: PS/2 mouse device common for all mice
[ 2.323442] i2c_dev: i2c /dev entries driver
[ 2.330097] rk808 1-0018: chip id: 0x8050
[ 2.335397] rk808-regulator rk808-regulator: there is no dvs0 gpio
[ 2.336042] rk808-regulator rk808-regulator: there is no dvs1 gpio
[ 2.337588] vdd_logic: supplied by vcc_sys
[ 2.339588] vdd_arm: supplied by vcc_sys
[ 2.340732] vcc_ddr: supplied by vcc_sys
[ 2.342045] vcc_io: supplied by vcc_sys
[ 2.343805] vcc_18: supplied by vcc_io
[ 2.346559] vcc18_emmc: supplied by vcc_io
[ 2.349519] vdd_10: supplied by vcc_io
[ 2.356230] rk808-rtc rk808-rtc: registered as rtc0
[ 2.357366] rk808-rtc rk808-rtc: setting system clock to 2016-01-21T08:50:12 UTC (1453366212)
[ 2.359567] input: rk805 pwrkey as /devices/platform/ff160000.i2c/i2c-1/1-0018/rk805-pwrkey/input/input0
[ 2.362460] IR NEC protocol handler initialized
[ 2.365749] rockchip-thermal ff250000.tsadc: Missing tshut mode property, using default (cru)
[ 2.366566] rockchip-thermal ff250000.tsadc: Missing tshut-polarity property, using default (low)
[ 2.369395] dw_wdt ff1a0000.watchdog: No valid TOPs array specified
[ 2.371339] device-mapper: uevent: version 1.0.3
[ 2.372437] device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: dm-devel@redhat.com
[ 2.379740] sdhci: Secure Digital Host Controller Interface driver
[ 2.380346] sdhci: Copyright(c) Pierre Ossman
[ 2.380749] Synopsys Designware Multimedia Card Interface Driver
[ 2.381909] sdhci-pltfm: SDHCI platform and OF driver helper
[ 2.383032] dwmmc_rockchip ff520000.dwmmc: IDMAC supports 32-bit address mode.
[ 2.383772] dwmmc_rockchip ff520000.dwmmc: Using internal DMA controller.
[ 2.384404] dwmmc_rockchip ff520000.dwmmc: Version ID is 270a
[ 2.385054] dwmmc_rockchip ff520000.dwmmc: DW MMC controller at irq 42,32 bit host data width,256 deep fifo
[ 2.386097] ledtrig-cpu: registered to indicate activity on CPUs
[ 2.387317] mmc_host mmc2: card is non-removable.
[ 2.388017] hid: raw HID events driver (C) Jiri Kosina
[ 2.389132] usbcore: registered new interface driver usbhid
[ 2.389657] usbhid: USB HID core driver
[ 2.397009] rk3328-codec ff410000.codec: spk_depop_time use default value.
[ 2.399075] mmc_host mmc2: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[ 2.403265] Initializing XFRM netlink socket
[ 2.404569] NET: Registered PF_INET6 protocol family
[ 2.408063] Segment Routing with IPv6
[ 2.408493] In-situ OAM (IOAM) with IPv6
[ 2.414295] bpfilter: Loaded bpfilter_umh pid 162
[ 2.415561] NET: Registered PF_PACKET protocol family
[ 2.416536] Bluetooth: RFCOMM TTY layer initialized
[ 2.417028] Bluetooth: RFCOMM socket layer initialized
[ 2.417540] Bluetooth: RFCOMM ver 1.11
[ 2.417901] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 2.418446] Bluetooth: HIDP socket layer initialized
[ 2.419151] Key type dns_resolver registered
[ 2.421213] registered taskstats version 1
[ 2.421646] Loading compiled-in X.509 certificates
[ 2.422579] Key type .fscrypt registered
[ 2.423020] Key type fscrypt-provisioning registered
[ 2.474407] friendlyelec-board board: Serial : ab404da8e781840f
[ 2.476145] vcc_sd: supplied by vcc_io
[ 2.483206] rockchip-drm display-subsystem: bound ff370000.vop (ops 0xffffffc008fa6578)
[ 2.484514] dwhdmi-rockchip ff3c0000.hdmi: Detected HDMI TX controller v2.11a with HDCP (inno_dw_hdmi_phy2)
[ 2.486745] dwhdmi-rockchip ff3c0000.hdmi: registered DesignWare HDMI I2C bus driver
[ 2.488285] rockchip-drm display-subsystem: bound ff3c0000.hdmi (ops 0xffffffc008faa538)
[ 2.489697] rockchip-drm display-subsystem: [drm] Cannot find any crtc or sizes
[ 2.491244] [drm] Initialized rockchip 1.0.0 20140818 for display-subsystem on minor 0
[ 2.494236] rk3328-dmc-freq dmc: current ATF version 0x101
[ 2.494307] dwmmc_rockchip ff500000.dwmmc: IDMAC supports 32-bit address mode.
[ 2.495510] dwmmc_rockchip ff500000.dwmmc: Using internal DMA controller.
[ 2.496125] dwmmc_rockchip ff500000.dwmmc: Version ID is 270a
[ 2.496735] dwmmc_rockchip ff500000.dwmmc: DW MMC controller at irq 41,32 bit host data width,256 deep fifo
[ 2.508096] input: gpio-keys as /devices/platform/gpio-keys/input/input1
[ 2.509330] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0)
[ 2.510969] ALSA device list:
[ 2.511095] mmc_host mmc2: Bus speed (slot 0) = 150000000Hz (slot req 150000000Hz, actual 150000000HZ div = 0)
[ 2.511287] #0: rockchip,hdmi0
[ 2.512326] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[ 2.513599] dw-apb-uart ff130000.serial: forbid DMA for kernel console
[ 2.532246] Freeing unused kernel memory: 5824K
[ 2.532855] Run /init as init process
Loading, please wait...
Starting version 249.11-0ubuntu3.7
[ 2.630858] mmc_host mmc0: Bus speed (slot 0) = 100000000Hz (slot req 100000000Hz, actual 100000000HZ div = 0)
[ 2.642966] usb 5-1: new SuperSpeed USB device number 2 using xhci-hcd
[ 2.668348] usb 5-1: New USB device found, idVendor=0bda, idProduct=8153, bcdDevice=31.00
[ 2.669134] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=6
[ 2.669774] usb 5-1: Product: USB 10/100/1000 LAN
[ 2.670196] usb 5-1: Manufacturer: Realtek
[ 2.670569] usb 5-1: SerialNumber: 000000000000
[ 2.837596] dwmmc_rockchip ff500000.dwmmc: Successfully tuned phase to 114
[ 2.838341] mmc0: new ultra high speed SDR50 SDHC card at address aaaa
[ 2.841813] mmcblk0: mmc0:aaaa SU08G 7.40 GiB
[ 2.852085] mmcblk0: p1 p2
[ 2.895188] dwmmc_rockchip ff520000.dwmmc: Successfully tuned phase to 191
[ 2.896132] mmc2: new HS200 MMC card at address 0001
[ 2.898375] mmcblk2: mmc2:0001 A3A551 28.9 GiB
[ 2.907132] mmcblk2: p1 p2 p3 p4 p5 p6 p7 p8 p9
[ 2.911882] mmcblk2boot0: mmc2:0001 A3A551 4.00 MiB
[ 2.916799] mmcblk2boot1: mmc2:0001 A3A551 4.00 MiB
[ 2.921476] mmcblk2rpmb: mmc2:0001 A3A551 16.0 MiB, chardev (243:0)
[ 3.252596] rk_gmac-dwmac ff540000.ethernet: init for RGMII
[ 3.258914] rk_gmac-dwmac ff540000.ethernet: init for RGMII
[ 3.264967] rk_gmac-dwmac ff540000.ethernet: init for RGMII
[ 3.518934] rockchip-drm display-subsystem: [drm] Cannot find any crtc or sizes
Begin: Loading essential drivers ... done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
Begin: Running /scripts/local-premount ... done.
Begin: Will now check root file system ... fsck from util-linux 2.37.2
[/usr/sbin/fsck.ext4 (1)
Here is lsblk and df-h output captured from a system running in a core mode with SD card plugged in
SD card is plugged out. Board fails to boot from emmc. I've tried to execute some basic core built-in commands in order to get more info but had no luck.