Power & Source of Big Ideas

R1 Wireless Access Point trouble

Moderators: chensy, FATechsupport

Hello, I'm trying to use a NanoPi R1 running OpenWrt 19.07.1 as a wireless access point. I can't tell whether or not it's working given what's shown on LuCI:

Screen Shot 2022-10-02 at 1.02.20 PM.png
Screen Shot 2022-10-02 at 1.02.20 PM.png (175.2 KiB) Viewed 2412 times


Screen Shot 2022-10-16 at 4.14.38 PM.jpg
Screen Shot 2022-10-16 at 4.14.38 PM.jpg (195.49 KiB) Viewed 2412 times


Here's the output of running wifi status:
"radio0": {
"up": true,
"pending": false,
"autostart": true,
"disabled": false,
"retry_setup_failed": false,
"config": {
"hwmode": "11g",
"path": "platform/soc/1c10000.mmc/mmc_host/mmc2/mmc2:0001/mmc2:0001:1",
"htmode": "HT20",
"channel": "auto",
"distance": 40,
"country": "US",
"disabled": false
},
"interfaces": [
{
"section": "default_radio0",
"ifname": "wlan0",
"config": {
"mode": "ap",
"encryption": "psk2",
"ft_over_ds": true,
"ssid": "******",
"ft_psk_generate_local": true,
"key": "*******",
"ieee80211r": true,
"network": [
"lan"
],
"mode": "ap"
}
}
]
}
...Anyone out there? LOL

Who is online

In total there are 3 users online :: 0 registered, 0 hidden and 3 guests (based on users active over the past 5 minutes)
Most users ever online was 5185 on Wed Jan 22, 2020 1:44 pm

Users browsing this forum: No registered users and 3 guests