Page 1 of 1
Nanopc T6 power requirements
Posted: Tue Sep 17, 2024 11:13 am
by specs
Hi,
Currently I'm testing with a NanoPC-T6.
Can anyone tell me what the power requirements are for the T6?
The specification tells "12V".
The schematics show "DC12V Adapter" => "BUCK +4V".
What range can I allow for? 12V +/-5% ? +/-10% ?? +/-20% ???
Re: Nanopc T6 power requirements
Posted: Sat Sep 21, 2024 1:26 am
by Johnsondavid
specs wrote:Hi,
Currently I'm testing with a NanoPC-T6.
Can anyone tell me what the power requirements are for the T6?
Geometry Dash ScratchThe specification tells "12V".
The schematics show "DC12V Adapter" => "BUCK +4V".
What range can I allow for? 12V +/-5% ? +/-10% ?? +/-20% ???
Consider a tolerance of ±5% as generally safer, as exceeding this tolerance can cause hardware damage or voltage drop.
Re: Nanopc T6 power requirements
Posted: Tue Sep 24, 2024 3:58 pm
by janetsegern
Hi! For the NanoPC-T6, a voltage range of 12V ±5% is ideal to ensure the best performance. However, if the documentation allows, you can extend it to ±10% for a little more flexibility!
Re: Nanopc T6 power requirements
Posted: Sun Oct 06, 2024 7:52 am
by specs
Thanks for the answers.
I think the simple dc-dc adapter I wanted will not be sufficient for the 5% margin.