Does anyone has a CM3588 NAS kit up & running ?

[Sergio]

Hi,
Looking for comments or tips from anyone who has the CM3588 running as a NAS with OMV.
I am about to commit to upgrading my NanoPi M4 V2 / 4xSata Hat NAS with this new board.
Thanks

[yaazzz]

This CM3588 is very good for OMV : very simple to install. Only thing for me is the fan which is not working and I am trying to find a solution and the fact no case is available yet even for 3d printing (no time to design one).

[yaazzz]

Got it running OMV with 4 Nvme.

Fan is not working out of the Box :

echo 59 > /sys/class/gpio/export
echo out > /sys/class/gpio/gpio59/direction
echo 1> /sys/class/gpio/gpio59/value # to switch on the fan output
echo 0> /sys/class/gpio/gpio59/value # to switch off the fan output

Now I need to find a 3d case model to print as I have no time to design it

[blackmagic]

Do we need to put in these commands to enable GPIO based fans as well ?

[Dans34]

Not with OMV but i use the minimal debian image and EMBY for my media server and 4x 2tb ssd's (hopefully will upgrade to 4 x 4tb ssd's this year)

i just run the bare minimum needed