CM3588 Doesn't seem to power up

[jeff7360]

Just bought a new board, installed 4 SSD, loaded the OMV img to an SSD to flasher the eMMC. Connected the board to power and HDMI and the only thing I get is the lights for SSD 2 and 3 flash green three times and go out. Nothing else happens.

I press the power button and this process repeats.

I don't see any information on what this means. The board came with no documentation.

Any ideas?

Thanks in advance.

[rhymesurfeit]

It sounds like the board is not booting properly from the SSD with the OMV image, and the LED flashing pattern you're seeing (SSD 2 and 3 flash green three times and then turn off) may indicate a boot failure or that the image isn't compatible or correctly written.

Let me know your board model, and I can guide you with exact image links and instructions for that specific hardware.