NanoPi M1 Plus
- $29.00
Buyer responsible for payment of duty.
- Availability: In Stock
- Brand: FriendlyElec
- Product Code: V1.0 1702
Available Options
Optional Accessories
-
SanDisk 8G MicroSD Card
($6 . 97) -
5V/3A MicroUSB Power Adapter
($8.97) -
Heat Sink with 3M thermal paste
($1. 00) -
3D Printed Housing
($4 . 99) -
Matrix Starter Kit
($32. 87) -
Compact Kit B-Schweizer Messer II
($14 . 99) -
USB to TTL Serial Cable
($3 . 99) -
TTL To RS232 Module
($3 . 95) -
2MP USB Camera Module
($15 . 97) -
5MP Camera Module (OV5640 chip)
($19 . 99) -
RTC Module (I2C)
($2 . 97) -
3-Axis Digital Compass (I2C)
($5 . 87) -
GPS Module (UART)
($19 . 87) -
Pressure & Temperature Sensor (I2C)
($4 . 97) -
Ultrasonic Ranger Sensor (I2C)
($5 . 97) -
3-Axis Digital Accelerometer (I2C)
($4 . 97) -
USB2LCD Module, White on Blue
($6. 97) -
LCD 1602 & Keypad (I2C)
($8 . 87) -
RC-100 IR Controller
($2 . 90) -
Mini USB WiFi
($6 . 97) -
T-Cobbler40 for Pi
($4 . 99) -
Matrix 2.8” SPI TFT LCD
($9 . 90)
| CPU | Model: Allwinner H3 Number of Cores: Quad-core Frequency: 4*Cortex-A7 Up to 1.2GHz |
| GPU | Mali400MP2@600MHz，Supports OpenGL® ES2.0 |
| Memory | RAM: 1GB DDR3 |
| Storage | eMMC: 8GB MicroSD Slot: MicroSD*1 for external storage up to 128GB |
| Connectivity | Ethernet: Gbps Ethernet WiFi: 802.11b/g/n Bluetooth: 4.0 dual-mode Antenna*1: IPX Connector |
| Audio | Audio Output: 3.5mm jack/Via HDMI Audio Input: onboard microphone |
| Video-Input | DVP Camera: 0.5mm pitch 24 pin FPC seat |
| Video Output | HDMI Type-A*1: v1.4, 4K@30fps CVBS*1(its video output is the 3.5mm audio jack) |
| USB | MicroUSB*1: MicroUSB 2.0, OTG & Power In, Type A USB Host: USB 2.0*3, USB Type-A *2 and 2.54mm pitch pin-header*1 |
| Pin-header | GPIO: 40pin, 2.54mm pitch pin-header, compatible with raspberry pi 2's GPIO. It contains UART, SPI, I2C, I2S/PCM, SPDIF-OUT, and IO Serial Debug Port: 2.54mm pitch 4-pin-header USB Host: 2.54mm pitch 4-pin-header |
| Button | Power Button*1 Reset Button*1 |
| LED | Power LED(Green)*1 System Status LED(Blue)*1 |
| Others | IR: onboard IR receiver Working Temperature: -20℃ to 70℃ |
| Power | DC 5V/2A |
| OS Support | FriendlyCore( based on UbuntuCore-16.04 ) FriendlyCore Focal (Base on Ubuntu 20.04) FriendlyWrt 19.07.1 (32-bit) Armbian DietPi Lakka |
| Kernel version | Linux-4.14-LTS U-boot-2017.11 |
| PCB | 6 Layer |
| Dimension | 65*60mm |
Related Resources
WIKI: http://wiki.friendlyelec.com/wiki/index.php/NanoPi_M1_Plus
Schematic :NanoPi-M1-Plus-1702-Schematic.pdf
Allwinner H3 datasheet :Allwinner_H3_Datasheet_V1.2.pdf
Qt Application: Allwinner H3, Qt 4.8.6
| Hardware Spec | |
| CPU: | Allwinner H3, Quad-core Cortex-A7@1.2GHz |
| GPU: | Mali400MP2@600MHz，Supports OpenGL® ES2.0 |
| Connectivity: | 1 x Power Button and 1 x Reset Button |
| Storage: | 8GB eMMC |
| USB Host: | USB 2.0 x 3, 2 x USB Type A and 1 x 2.54mm pitch pin-header |
| WiFi: | 802.11 b/g/n |
| Antenna Interface: | Shared by WiFi and Bluetooth, IPX interface |
| Audio input/output Port | 3.5mm jack/Via HDMI,HDMI 1.4 1080P, CVBS |
| Bluetooth: | 4.0 dual mode |
| IR: | onboard IR receiver |
| Microphone: | onboard microphone |
| microSD Slot: | 1 |
| microUSB: | power input and data transmission, OTG |
| DVP Camera Interface: | 24pin, 0.5mm pitch FPC seat |
| GPIO: | 40pin, 2.54mm pitch pin-header, compatible with raspberry pi 2's GPIO. It contains UART, SPI, I2C, I2S/PCM, SPDIF-OUT and IO |
| Serial Debug Port: | 4Pin, 2.54mm pitch pin-header |
| PCB Dimension: | 65 x 60 mm, ENIG |
| Power: | DC 5V/2A |
| Working temperature: | -20℃ to 70℃ |
| Software Features | |
| OS Support | FriendlyCore( based on UbuntuCore-16.04 ) FriendlyWrt 19.07.1 (32-bit) Armbian DietPi Lakka |
Recently viewed
