CM3588
- $95.00
Buyer responsible for payment of duty.
- Availability: In Stock
- Brand: FriendlyElec
- Product Code: 2306
Available Options
If you encounter logistics problems after ordering this product, please contact: chuting@friendlyarm.com
—CPU Board Hardware spec
| CPU | Model: Rockchip RK3588 Number of Cores: Quad-core ARM Cortex-A76 + Quad Core Cortex-A55 Frequency: Cortex-A76(up to 2.4GHz), Cortex-A55(up to 1.8GHz) |
| GPU | Mali-G610 MP4, compatible with OpenGLES 1.1, 2.0, and 3.2, OpenCL up to 2.2 and Vulkan1.2 |
| VPU | 8K@60fps H.265 and VP9 decoder, 8K@30fps H.264 decoder, 4K@60fps AV1 decoder. 8K@30fps H.264 and H.265 encoder |
| NPU | 6TOPs, supportS INT4/INT8/INT16/FP16 |
| Memory | RAM: 64-bit 4GB/8GB/16GB LPDDR4X@2133MHz |
| Storage | eMMC:0GB/64GB eMMC, at HS400 mode 1 x MicroSD interface, support up to SDR104 mode |
| Connectivity | 1 x On-board PCle 2.5G ethernet controller (RTL8125B) |
| USB | 2 x USB 3.1 Gen1 OTG which combo with DP display(up to 4Kp60) 1 x USB 3.1 Gen1 Host 2 x USB 2.0 Host |
| PCle | up to 4 x PCle interfaces 2 x PCle 2.1 x1 and 2 x PCle 3.0 x2 or 2 x PCle 2.1 x1 and 1 x PCle 3.0 x4 or 1 x PCle 2.1 x1,1 x PCle 3.0 x2, and 2 x PCle 3.0 x1 or 4 x PCle 3.0 x1 |
| Video | HDMI input: 1 x HDMI input, up to 4Kp60 HDMI output: 2 x HDMI outputs which is compatible with HDM2.1, HDM2.0, and HDMl1.4 operation one support displays up to 7680x4320@60Hz, another one support up to 4Kp60 Support RGB/YUV(up to 10bit) format MIPI RX: 2 x 4lane MP| DPHY CSl RX which support x4 mode or x2+x2 mode, compatible with MlPI V1.2 2 x 4lane MIPI D/CPHY RX MIPI TX: 2 x 4-lane MP| D-PHY/C-PHY Combo PHY TX, compatible with MIPI DPHY 2.0 or CPHY 1.1 |
| Codec | On-board ALC5616 Codec 1 x stereo headphone output ( 20mW/CH, THD+N <= -80dB, 160hm Load ) 1 x single-end microphone input |
| LED | 1 x SYS LED(Red) 1 x LED1(Green) |
| Others | low power RTC (HYM8563TS) with backup battery input Support 38Khz IR input MASK button for eMMC update, reset button, Power button, and recovery mode button Debug UART,3.3V level, 1500000bps Working Temperature: 0℃ to 70℃ |
| Connector | 4xDF40C-100DP-0.4V(51), the mating connector is DF40HC(3.0)-100DS-0.4V(51) |
| Power | 5-20VDC input, 20W Max |
| OS Support | FriendlyWrt 24.10 FriendlyWrt 23.05 OpenMediaVault Android 12 Tablet Android 12 TV FriendlyCore Lite 20.04 Debian 11 Desktop Ubuntu 22.04 Desktop Ubuntu 24.04 Desktop Proxmox VE Alpine-Linux |
| Kernel version | Linux-6.1-LTS U-boot-2017.09 |
| *The firmware is continuously updated, refer to the actual version provided by the WiKi. |
—CPU Board Dimension
| PCB | 8 Layer |
| Weight | 21.20g |
| Dimension | 55 x 65 x 1.6 mm |
—Carrier Board Hardware spec
| Storage | 1 x MicroSD slot, support up to SDR104 mode |
| Ethernet | 1 x 2.5Gbps RJ45 Port |
| USB | 1 x USB 3.0 Type-C DRP port, which supports DP display (up to 4Kp60) 2 x USB 3.0 Type-A Ports 1 x USB 2.0 Type-A Port |
| PCle | 4 x M.2 M-Key connector with PCle 3.0 x1 for NVMe SSDs |
| Video | HDMI input: 1 x HDMI input, up to 4Kp60 HDMI output: 2 x HDMI outputs which is compatible with HDM2.1, HDM2.0, and HDMl1.4 operation one support displays up to 7680x4320@60Hz, another one support up to 4Kp60 Support RGB/YUV(up to 10bit) format MIPICSl: 1 x 4lane MIPI CSl, compatible with MIPI V1.2 MIPI DSl: 1 x 4lane MIPI DSl, compatible with MIPI DPHY 2.0 or CPHY 1.1 |
| Audio | 1x stereo 3.5mm headphone output Jack(20mW/CH THD+N <= -80dB 160hm load ) 1 x 2.0mm PH-2A connector for single-end microphone input |
| GPIO | up to 3 x SPls, 7 x UARTs, 6 x I2Cs, 15 x PWMs, 3 x 12Ss, 1 x SDIO, 81 x GPIOs |
| Pin-Header | GPIO:1 x 40 Pins 25.4mm GPIO header up to 2 x SPIs,6 x UARTS.1 x I2Cs.8xPWMs.2 x 12Ss.28 x GPIOs Debug:1 x Debug UART, 3 Pin 2.54mm header, 3V level, 1500000bps |
| LED | 4 x NVMe SSD LED(Green) 1 x PWR LED(Red) |
| Button | 1 x MASK button for eMMC update 1 x Reset button 1 x Power button 1 x Recovery Mode button 1 x User button |
| Others | IR receiver: Onboard IR receiver, Acceptes 38KHz carrier frequency RTC Battery: 2 Pin 1.27/1.25mm RTC battery input connector for low power RTC IC HYM8563TS Fan:1 x 5V Fan connector 1 x PWM buzzer Working Temperature: 0'C to 70°C |
| Power | 12V DC input, 80w Max:CM3588 20W, USB+GPIO+MIPI+Type-C 20W, 4 x M.2 SSD 39.6W *Running at full load, a 65W power supply recommended |
—Carrier Board Dimension
| PCB | 4 Layer |
| Weight | 110.0g |
| Dimension | 160 x 116 x 1.6mm |
Related Resources
| Hardware Spec | |
| SoC | Rockchip RK3588 CPU: Quad-core ARM Cortex-A76(up to 2.4GHz) and quad-core Cortex-A55 CPU (up to 1.8GHz) GPU: Mali-G610 MP4, compatible with OpenGLES 1.1, 2.0, and 3.2, OpenCL up to 2.2 and Vulkan1.2 VPU: 8K@60fps H.265 and VP9 decoder, 8K@30fps H.264 decoder, 4K@60fps AV1 decoder, 8K@30fps H.264 and H.265 encoder NPU: 6TOPs, supports INT4/INT8/INT16/FP16 |
| RAM | 64-bit 4GB/8GB/16GB LPDDR4X up to 2133MHz, 32GB LPDDR5 up to 2400MHz |
| Storage: | 0GB/64GB/256GB eMMC, at HS400 mode |
| Network: | 1 x On-board PCIe 2.5G ethernet controller (RTL8125B) |
| PCIe | up to 4 x PCIe interfaces 2 x PCIe 2.1 x1 and 2 x PCIe 3.0 x2 or 2 x PCIe 2.1 x1 and 1 x PCIe 3.0 x4 or 1 x PCIe 2.1 x1, 1 x PCIe 3.0 x2, and 2 x PCIe 3.0 x1 or 4 x PCIe 3.0 x1 |
| USB Host: | 2 x USB 3.1 Gen1 OTG which combo with DP display（up to 4Kp60） 1 x USB 3.1 Gen1 Host 2 x USB 2.0 Host |
| Debug Serial Port/UART0: | Debug UART,3.3V level, 1500000bps |
| Buttons | MASK button for eMMC update, reset button, Power button, and recovery mode button |
| IR: | Support 38Khz IR input |
| microSD Slot: | 1 x microSD interface, support up to SDR104 mode |
| HDMI: | HDMI input: 1 x HDMI input, up to 4Kp60 MIPI RX: 2 x 4lane MIPI DPHY CSI RX which support x4 mode or x2+x2 mode ,compatible with MIPI V1.2 2 x 4lane MIPI_D/CPHY_RX MIPI TX: 2 x 4-lane MIPI D-PHY/C-PHY Combo PHY TX, compatible with MIPI DPHY 2.0 or CPHY 1.1 Codec: On-board ALC5616 Codec 1 x stereo headphone output ( 20mW/CH, THD+N <= -80dB, 16Ohm Load ) 1 x single-end microphone input |
| GPIO: | up to 3 x SPIs, 7 x UARTs, 6 x I2Cs, 15 x PWMs, 3 x I2Ss, 1 x SDIO, 81 x GPIOs |
| LED: | 2 x GPIO Controlled LED (SYS, LED1) |
| RTC: | low power RTC (HYM8563TS) with backup battery input |
| PCB Dimension: | 8 Layers, CM3588 is 55x65x1.6mm, CM3588 Plus is 55x67.5x1.6mm. Stacking height: 6.6mm |
| Power: | 5~20VDC input, 20W max |
| Working temperature: | 0℃ to 70℃ |
Recently viewed
