| CPU | Model: Allwinner H3
Number of Cores: Quad-core Frequency: 4 x Cortex-A7 Up to 1.2GHz |
| Memory | RAM: 512MB(16-bit)/1GB(32-bit) |
| Storage | eMMC: NC(RAM: 512MB) /8GB (RAM: 1GB) MicroSD Slot: MicroSD x1 for external storage up to 128GB |
| Connectivity | Ethernet: 10/100M Ethernet x1 10/100/1000M Ethernet x1 WiFi: based on AP6212 Module, 802.11b/g/n, with SMA antenna interface Bluetooth: 4.0 dual-mode |
| USB | MicroUSB x1: MicroUSB 2.0, OTG & Power In USB Host: 2.0 Type-A x2 |
| Pin-header | Serial Debug Port: 2.54mm pitch 3-pin-header |
| Connector | UART x1: 2.54mm pitch 4-pin-connector |
| LED | PWR/STAT LED(Red) x1 LED(Green) x2 |
| Others | Button: User button x 1 RTC-BAT x1: Input Voltage 3.0~3.6V Working Temperature: -20℃ to 70℃ |
| Power | MicroUSB DC 5V/2A |
| OS Support | FriendlyCore 16.04(based on UbuntuCore-16.04) FriendlyWrt 19.07.1(Linux-4.14 + U-boot-2017.11) eFlasher |
| Kernel version | Linux-4.14-LTS U-boot-2017.11 |
| PCB | 6 Layer |
| Dimension | 50.5 x 60mm |
| Weight | 33g(only board)/125g(with metal case & heat sink) |
Related Resources
WIKI: https://wiki.friendlyelec.com/wiki/index.php/NanoPi_R1
| Hardware Spec | |
| CPU: | Allwinner H3, Quad-core Cortex-A7 Up to 1.2GHz |
| DDR3 RAM: | 512MB/1GB |
| Storage: | NC(RAM: 512MB) /8GB (RAM: 1GB) |
| Network: | 10/100/1000M Ethernet x1， 10/100M Ethernet x1 |
| USB Host: | Type-A x2 |
| WiFi: | 802.11b/g/n, with SMA antenna interface |
| Bluetooth: | 4.0 dual mode |
| Debug Serial Port/UART0: | 3Pin 2.54mm pitch pin-header |
| microSD Slot: | 1 |
| microUSB: | for OTG and power input |
| LED: | 3 |
| PCB Dimension: | 50.5 x 60mm |
| Power: | DC 5V/2A |
| Working temperature: | -20℃ to 70℃ |
| Software Features | |
| OS Support | FriendlyCore 16.04(based on UbuntuCore-16.04) FriendlyWrt 19.07.1(Linux-4.14 + U-boot-2017.11) eFlasher |
Recently viewed
