If you encounter logistics problems after ordering this product, please contact: chuting@friendlyarm.com
Related Resources
Hardware Spec | |
SoC | Rockchip RK3588 CPU: Quad-core ARM Cortex-A76(up to 2.4GHz) and quad-core Cortex-A55 CPU (up to 1.8GHz) GPU: Mali-G610 MP4, compatible with OpenGLES 1.1, 2.0, and 3.2, OpenCL up to 2.2 and Vulkan1.2 VPU: 8K@60fps H.265 and VP9 decoder, 8K@30fps H.264 decoder, 4K@60fps AV1 decoder, 8K@30fps H.264 and H.265 encoder NPU: 6TOPs, supports INT4/INT8/INT16/FP16 |
RAM | 64-bit 4GB/8GB/16GB LPDDR4X up to 2133MHz, 32GB LPDDR5 up to 2400MHz |
Storage: | 0GB/64GB/256GB eMMC, at HS400 mode |
Network: | 1 x On-board PCIe 2.5G ethernet controller (RTL8125B) |
PCIe | up to 4 x PCIe interfaces 2 x PCIe 2.1 x1 and 2 x PCIe 3.0 x2 or 2 x PCIe 2.1 x1 and 1 x PCIe 3.0 x4 or 1 x PCIe 2.1 x1, 1 x PCIe 3.0 x2, and 2 x PCIe 3.0 x1 or 4 x PCIe 3.0 x1 |
USB Host: | 2 x USB 3.1 Gen1 OTG which combo with DP display(up to 4Kp60) 1 x USB 3.1 Gen1 Host 2 x USB 2.0 Host |
Debug Serial Port/UART0: | Debug UART,3.3V level, 1500000bps |
Buttons | MASK button for eMMC update, reset button, Power button, and recovery mode button |
IR: | Support 38Khz IR input |
microSD Slot: | 1 x microSD interface, support up to SDR104 mode |
HDMI: | HDMI input: 1 x HDMI input, up to 4Kp60 MIPI RX: 2 x 4lane MIPI DPHY CSI RX which support x4 mode or x2+x2 mode ,compatible with MIPI V1.2 2 x 4lane MIPI_D/CPHY_RX MIPI TX: 2 x 4-lane MIPI D-PHY/C-PHY Combo PHY TX, compatible with MIPI DPHY 2.0 or CPHY 1.1 Codec: On-board ALC5616 Codec 1 x stereo headphone output ( 20mW/CH, THD+N <= -80dB, 16Ohm Load ) 1 x single-end microphone input |
GPIO: | up to 3 x SPIs, 7 x UARTs, 6 x I2Cs, 15 x PWMs, 3 x I2Ss, 1 x SDIO, 81 x GPIOs |
LED: | 2 x GPIO Controlled LED (SYS, LED1) |
RTC: | low power RTC (HYM8563TS) with backup battery input |
PCB Dimension: | 8 Layers, CM3588 is 55x65x1.6mm, CM3588 Plus is 55x67.5x1.6mm. Stacking height: 6.6mm |
Power: | 5~20VDC input, 20W max |
Working temperature: | 0℃ to 70℃ |
Recently viewed